Buy FSR IT-AS411-25S8, 4x1 Audio Switcher with Voice Lift Mixing

info@PrimeBuy.com

1-855-969-9322
1-908-282-3332 (Intl.)

Options and Related Products

Features:: Features: Voice Lift Mixing and Stereo Amplifier

FSR, IT-AS411-25S8, 4x1 Audio Switcher with Voice Lift Mixing and 25W Stereo Output Internal Audio Amplifier

Features:

Mic / line level voice lift input
Program audio / voice lift mixing
Program audio inputs and outputs
Serial control with serial pass-through
Terminals for remote muting of voice and/or program audio via dry contact closure
On board LED's monitor; input select, volume level and muting status
Current limited remote LED output terminal for program audio and voice (mute) status
Integrated audio amplifiers on A25-M70 and A25-S8 models
Program audio trim (gain)
Preamplifier output

It have four switched program audio inputs and an independent mic or line level input that is summed (mixed) with the selected active program audio. It have balanced or unbalanced input and output capability. DIP switches are provided to set the voice input level to mic or line, adjust microphone sensitivity, set phantom power and select mono or stereo operation. It also have adjustable volume control buttons and mute for both the program audio and voice inputs.

It has a 25W stereo output internal audio amplifier to drive a either a 4 to 8 ohms speaker, preamp out.

Report incorrect product information

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

All sales are final

These are made-to-order items.
This product is not eligible for return or exchange unless defective.
The average lead-time is 1 or 2 weeks.

Return and Warranty

Please note that return requests for FSR items must be submitted within 14 days after the delivery date.

Technical Details

Reviews

Program Audio Input
Program Inputs	4, Stereo balanced/unbalanced
Connector Type	Pluggable screw terminal
Input sensitivity	-20dBV with 8Ω load
Input Level	7.5dBV
Input Impedance	20kΩ balanced/unbalanced
''Voice in type'' Input
Connector type	Pluggable screw terminal
''Voice in' type	Microphone/Line
Microphone sensitivity	-43/-35dB
Maximum input level	1dBV
Low cutoff	200Hz
Phantom power	24V
Preamp Audio Output
Connector type	Pluggable screw terminal
Number of outputs	1 Stereo or 2 Mono (L + R program input summed)
Signal output	Balanced/unbalanced
Frequency response	20Hz - 20kHz (+/- 0.5dB)
THD + N	<0.09% at 1kHz; 11dBV with 600Ω load (balanced)
Signal to Noise ratio	>80dB at 1 kHz; rated output (unweighted)
Output impedance	50Ω
Amplifier Audio Output
Connector type	Pluggable screw terminal
Number of outputs	Stereo or 2 Mono (L + R program input summed)
Frequency response	20Hz - 20kHz (+0, -1dB)
THD + N	<0.7% at 1kHz; 25Wrms 8Ω
Signal to Noise ratio	>80dB at 1kHz; rated output (unweighted)
Load impedance	4 to 8Ω
Power output	25Wrms at 4 to 8Ω
Power	24 VDC 2.5A
Dimensions	1.5'' H x 8.47'' W x 6'' D

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

Program Audio Input
Program Inputs	4, Stereo balanced/unbalanced
Connector Type	Pluggable screw terminal
Input sensitivity	-20dBV with 8Ω load
Input Level	7.5dBV
Input Impedance	20kΩ balanced/unbalanced
''Voice in type'' Input
Connector type	Pluggable screw terminal
''Voice in' type	Microphone/Line
Microphone sensitivity	-43/-35dB
Maximum input level	1dBV
Low cutoff	200Hz
Phantom power	24V
Preamp Audio Output
Connector type	Pluggable screw terminal
Number of outputs	1 Stereo or 2 Mono (L + R program input summed)
Signal output	Balanced/unbalanced
Frequency response	20Hz - 20kHz (+/- 0.5dB)
THD + N	<0.09% at 1kHz; 11dBV with 600Ω load (balanced)
Signal to Noise ratio	>80dB at 1 kHz; rated output (unweighted)
Output impedance	50Ω
Amplifier Audio Output
Connector type	Pluggable screw terminal
Number of outputs	Stereo or 2 Mono (L + R program input summed)
Frequency response	20Hz - 20kHz (+0, -1dB)
THD + N	<0.7% at 1kHz; 25Wrms 8Ω
Signal to Noise ratio	>80dB at 1kHz; rated output (unweighted)
Load impedance	4 to 8Ω
Power output	25Wrms at 4 to 8Ω
Power	24 VDC 2.5A
Dimensions	1.5'' H x 8.47'' W x 6'' D

Return and Warranty

Please note that return requests for FSR items must be submitted within 14 days after the delivery date.

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

FSR IT-AS411-25S8 4x1 Audio Switcher with Voice Lift Mixing

Identifiers

Return and Warranty

Technical Details

Return and Warranty

Reviews