FSR HD-HPCUWP-Tx HDBaseT 2.0 Transmitter Wall Plate with HDMI and VGA

HD-HPCUWP-Tx Includes Only:

• One FSR HD-HPCUWP-TX HDBaseT Wall Plate Transmitter
• One Phoenix Male Connector (3.5mm, 2 Pins)
• One 2-gang plastic cover plate with mounting screws

Features:

• HDMI or VGA with stereo audio input selection via manual push-button, or auto switching
• Independent analog stereo audio input channel providing an independent analog audio output channel at the HDBaseT Receiver
• Display Auto-power feature via CEC or RS-232
• Manual override switches for source selection and display power
• 4Kx2K at60Hz (YUV 4:2:0 color sub-sampling) and 1080P at60Hz output up to 100m via Cat 6/6a/7 cable
• 4Kx2K at60Hz (YUV 4:2:0 color sub-sampling) output up to 90m, and 1080P at60Hz up to 100m Via Cat 5e cable
• HDMI with 4k at60Hz (Chroma sub-sampling 4:2:0 8-bit only) and HDCP 2.2 compliance
• Supports Long Reach Mode, extending 1080p at60Hz signals to 150m via the API command interface.
• High-speed USB 2.0, up to 480Mbps, over HDBaseT up to 100m
• 2-Gang Decora wall plate
• Ethernet and IR pass-through over HDBaseT 2.0
• PoH support or powered locally
• Firmware upgrade and device configuration via Micro USB for easy field service (located under 2-gang cover plate)

This is a 2x1 auto switching wall plate for HDMI and VGA with audio inputs with an HDBaseT 2.0 output. This wall plate is a true HDBaseT 5-Play device that transmits uncompressed 4K/UHD at60hz (YUV 4:2:0 color sub-sampling), VGA input signals up to 1920 x 1200, embedded audio, and control signals can be extended up to 328 feet (100 meters).

The front of the wall plate features an HDMI In & VGA In (HD-15 female) with audio In ( 1/8'' mini jack), analog audio ( 1/8'' mini jack), an IR reader window, two-way USB 2.0, as well as input selector and display buttons to select inputs and control the display/project via RS-232 or CEC control. A micro-USB connector located under the 2-gang cover plate is used to configure the unit.

The rear of the wall plate contains an HDBaseT RJ-45 port as well as captive screw terminals for +12v in for applications where the wall plate can be powered locally instead of via the HDBaseT Receiver.