FRC (Fire Research Corp.), FCA540-V11, Evolution II LED Twist-Lock Side Mount Pull/Up Pole, DC 11k Lumen
The Side Mount Pull-Up pole has an outer tube that qualifies as an NFPA compliant handrail. This grab-handle is grooved to provide a secure grip even when wearing gloves. The outer tube is the full length of the pole and it has an internal brake that slows the extension pole during lowering. The pole is raised from the top by pulling up from above the safety twist lock.
Fire Research Evolution II LED model FCA540-V11 side mount pull up telescopic light shall be installed. The light pole shall be anodized aluminum and have a knurled twist lock mechanism to secure the extension pole in position. The extension pole shall rotate 360 degrees. An internal brake shall slow the extension pole during lowering. The outer pole shall be a grooved aluminum extrusion and qualify as an NFPA compliant handrail. The pole mounting brackets shall have a 3-1/2" offset. Wiring shall extend from the pole bottom with a 4' retractile cord. The lamphead shall have four (4) ultra-bright white LEDs. It shall operate at 12/24 volts DC, draw 7.5/3.75 amps, and generate 11,000 lumens. The lamphead shall direct 50 percent of the light onto the action area while providing 50 percent to illuminate the working area. The lamphead angle of elevation shall be adjustable at a pivot in the mounting arm and the position locked with a round knurled locking knob. The lamphead shall incorporate heat-dissipating fins and be no more than 5-3/16" deep by 3-5/16" high by 7-5/8" wide. The lamphead and mounting arm shall be powder coated white. The floodlight shall be for fire service use.
