QOS | - 802.11E support (including WMM)
- Dynamic WMM rate adaptation
- Configurable QoS rules per user and application
|
Operating Modes | - Centralized deployment mode
- Distributed deployment mode
- Remote VPN tunnel mode
|
Security | - WEP, WPA-PSK, WPA-TKIP, WPA2-AES, 802.11i, 802.1X (EAP-TLS, EAP-TTLS, PEAP, LEAP, EAP-FAST, EAP-SIM, EAP-AKA, and EAP-MD5)
- 802.1X and captive portal authentication against local database on the controller, RADIUS, and Active Directory
- RADIUS-assisted per-user and per-ESSID access control via MAC filtering
|
Management | - Centrally managed by any Fortinet controller running System Director
- Automatically discovers controllers and downloads configuration settings for plug-and-play deployment
- Upgrades and management using System Director / Network Manager
- Support for SNMP
|
Wireless Specifications |
Model Introduction | OAP832e IEEE802.11a/b/g/n/ac access point, dual radio with six N-type connectors for external antennas |
Supported Radio Technologies | - 2.4 GHz and 5 GHz radio access point
- 3x3:3SS (three spatial streams)
- Outdoor application
- Supported 2.4 GHz (TurboQAM Mode)
- Supported transmit beam-forming (TxBF)
- IEEE Std 802.11ac standard
- IEEE Std 802.11n/ac with Orthogonal Frequency Division Multiplexing (OFDM)
- IEEE Std 802.11b with Direct Sequence Spread Spectrum (DSSS)
- IEEE Std 802.11ac with 20/40/80 MHz (VHT20/40/80) channel width
- IEEE Std 802.11n with 40 MHz (HT40) channel width
- IEEE Std 802.11a/g with 20 MHz channel
- IEEE Std 802.11b with 22 MHz channel
|
Supported Modulation | - IEEE Std 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
- IEEE Std 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
- IEEE Std 802.11b: BPSK, QPSK, CCK
- Featured 256-TurboQAM modulation for 2.4 GHz and 5 GHz operations
|
Supported MCS Index | - Supported MCS0-MCS9 (NSS=1-3) for IEEE Std 802.11ac
- Supported MCS0-MCS23 for IEEE Std 802.11n
|
Supported Frequency Bands | - 2.400-2.4835 GHz (ISM)
- 5.150-5.250 GHz (UNII-1)
- 5.250-5.350 GHz (UNII-2, DFS)
- 5.470-5.725 GHz (UNII-2 Extended, DFS)
- 5.725-5.825 GHz (UNII-3)
- Country-specific restrictions apply: adjusted by controller upon approval
|
Operating Channels | - 2.4 GHz channels
- CH1-11 for U.S., Canada
- CH1-13 for Japan, Europe, rest of world
- 5 GHz HT20 (20 MHz) Channel
- Non-DFS Channel: CH36, 40, 44, 48, 144, 149, 153, 161, 165
- DFS Channel upon approval: CH 52, 56, 60, 64, 100, 104, 108, 112, 116, 120*, 124*, 128*, 132*,
- 136, 140, 144 (*weather radar)
- 5 GHz HT40 (40 MHz) Center Channel
- Non-DFS channel: CH38, 46, 151, 159
- DFS channel upon approval: CH54, 62, 102, 110, 118*, 116*, 134* 134, 142 (*weather radar)
- 5 GHz VHT80 (80 MHz) Center Channel
- Non-DFS channel: CH42, 155
- DFS channel upon approval: CH58, 106, 122* (*weather channel)
- Platform supports Dynamic Frequency Selection (DFS and DFS/TPC) for future 5 GHz channel adoption
- Country-specific restrictions apply; adjusted by controller upon approval
|
Supported Data Rate (Mbps) | - IEEE Std 802.11ac three streams: 19.5-1300 Mbps (MCS0-HT20 at800nS to MCS9-HT40 at400nS)
- IEEE Std 802.11ac per stream: 6.5-433.3 Mbps (MCS0-HT20 at800nS to MCS9-HT40 at400nS)
- IEEE Std 802.11n three streams: 13-450 Mbps (MCS9-HT20 at800nS to MCS23-HT40 at400nS)
- IEEE Std 802.11n per stream: 6.5-150 Mbps (MCS0-HT20 at800nS to MCS7-HT40 at400nS)
- IEEE Std 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
- IEEE Std 802.11b: 1, 2, 5.5, 11 Mbps
|
Configurable Transmission Power | - Transmission power configurable in 1.0 dBm increments
- Unused radios can be disabled via software for lower power consumption
- Antennas 6 external omnidirectional antennas for 3x3 MIMO with maximum antenna gain of 6 dBi in 2.4 Ghz and 7 dBi in 5 Ghz.
|
Physical Specifications |
Power | - Operates at IEEE 802.3at power
- Powered by IEEE Std 802.1at PoE (Power over Ethernet) injector or switch
|
Other Interfaces | - Networks:
- 1x 10/100/1000 Base-T Ethernet RJ45 uplink (G1),
- 1x 10/100/1000 Base-T Ethernet RJ45 (G2) for downlink and future expansion purposes, auto-sensing link speed and MDI/MDX
- 6 N-Type connectors for external antenna SKU (AP832e)
- 1 RJ45 port (G1) support IEEE Std 802.3af or 802.3at PoE
- 1 USB 2.0 port (Type-A) for future feature
- 1 Kensington security slot
|
LED Indicators | - 1 LED for AP Power ON status
- 2 LEDs for Ethernet activity over two RJ45 ports (LAN1 and LAN2)
- 2 LEDs for the 2.4 GHz and 5.0 GHz radio status indicator
|
Mounting | - 1.5-1.6 inch (5-7.5 cm) diameter pole-mounting kit (included)
- Wall-mounting kit (included)
|
Dimensions | 11.0 x 8.54 x 2.0 inches (28.0 x 21.7 x 5.0 cm) |
Weight | - OAP832e (without mounting bracket): 5 lbs (2.27 kg)
- OAP832e (with mounting bracket): 7 lbs (3.18 kg)
|
Environmental | - Operating temperature: -40°-149°F (-40-65°C)
- Operating humidity: 5-95% non-condensing
- Storage temperature: -40-158° F (-40-70°C) ambient
- Storage humidity: 5-95% non-condensing
- Surge protection built in
|
Regulatory Approval | - FCC (United States of America)
- CE Mark (European Community)
- Industry Canada (Canada)
- TELEC (Japan)
- Safety Approval (worldwide)
- EU RoHS
- For more country-specific regulatory approval, please contact your Fortinet representative.
|
Certifications | - Wi-Fi certified IEEE Std 802.11a/b/g/n (ac)
- IP67
- CB Report
|
Part Number | 6 extended Type N female connectors |