| Magnification | 200X with OptiFiber Pro Display |
| Light source | Blue LED |
| Power source | Versiv mainframe |
| Field of View (FOV) | - Horizontal: 425 µm
- Vertical: 320 µm
|
| Minimum detectable particle size | 0.5 µm |
| Dimensions | Approximately 6.75 in x 1.5 in (1175 mm x 35 mm) without adapter tip |
| Weight | 200 g |
| Temperature range | - Operating: 32°F to 122°F (0 °C to +50 °C)
- Storage: -4°F to +158°F (-20°C to +70°C)
|
| Certifications | CE (when used with the mainframe) |
| On/Off control | Mechanical switch and a button on the touch screen |
| Output power | 316 µW (-5 dBm) = peak power = 1.0 mW (0 dBm) |
| Operating wavelength | 650 nm nominal |
| Spectral width (RMS) | ±3 nm |
| Output modes | Continuous wave Pulsed mode (2 Hz to 3 Hz blink frequency) |
| Connector adapter | 2.5 mm universal |
| Laser safety (classification) | Class II CDRH Complies to EN 60825-2 |
| Weight | Mainframe with module and battery: 3 lbs, 5 oz (1.28 kg) |
| Dimensions | Mainframe with module and battery: 2.625 in x 5.25 in x 11.0 in ( 6.67 cm x 13.33 cm x 27.94 cm) |
| Battery | Lithium ion battery pack, 7.2 volts |
| Battery life | Eight hour Auto OTDR operation, dual wavelength, no video probe connected, 150 m of fiber |
| Integrated Wi-Fi | Meets IEEE 802.11 a/b/g/n; dual band (2.4 GHz and 5 GHz) |
| Tester Off | Four hours to charge from 10% to 90% capacity |
| Tester On | Six hours to charge from 10% to 90% capacity with the tester on |
| Operating temperature | -10°C to 45°C |
| Storage Temperature | -10°C to +60°C |
| Operating altitude | - 4,000 m (13123 ft)
- 3200 m (10,500 ft) with ac adapter
|
| Storage altitude | 12,000 m |
| EMC | EN 61326-1 |
| Type | Singlemode module |
| Wavelengths | - 1310 nm +/- 25 nm
- 1550 nm +/- 30 nm
|
| Event dead zone 1 | - 1310 nm: 0.6 m typical
- 1550 nm: 0.6 m typical
|
| Attenuation dead zone 2 | - 1310 nm: 3.6 m typical
- 1550 nm: 3.7 m typical
|
| Dynamic range 3, 5, 6 | - 1310 nm: 32 dB typical
- 1550 nm: 30 dB typical
|
| Max distance range setting | 130 km |
