Buy Fluke Networks CFP-SM-ADD, Certifiber Pro Cable Finder, Singlemode

info@PrimeBuy.com

1-855-969-9322
1-908-282-3332 (Intl.)

CFP-SM-ADD Includes Only:

(2) CertiFiber Pro Singlemode OLTS Modules
SC/LC SM TRC Kit
TRC Carrying Case
(2) LC/LC Adaptors
Large Carry Case
Statement of Calibration and Getting Started Guide

Features:

Set reference wizard verifies test reference cords (TRCs) per ISO/IEC 14763-3 and eliminates negative loss errors
Encircled Flux compliant optical launch conditions required by ANSI/TIA and ISO/IEC standards
Double ended fiber optic end-face certification to IEC 61300-3-35
Optical loss test set with fastest time to certify - two fibers at two wavelengths in under three seconds.
Encircled Flux compliant as required by ANSI/TIA and ISO/IEC
Optical loss test set provides automatic Pass/Fail analysis to industry standards or custom test limits
Double ended Pass/Fail certification of fiber optic connector endfaces
Graphical indication of problem areas on fiber endfaces due to contamination, pits, chips and scratches
Convenient quad module supports both multimode and singlemode loss testing
Extended singlemode distance range to 130km
Optical loss test set with built in Visual Fault Locator

The CertiFiber Pro Optical Loss Test Set improves the efficiency of fiber optics certification. The Taptive user interface simplifies set-up, eliminates errors and speeds troubleshooting. A set reference wizard ensures correct reference setting and eliminates negative loss errors. Built on the future-ready Versiv platform, CertiFiber Pro Optical Loss Test Set (OLTS) provides merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with OptiFiber Pro module. A convenient quad module supports both singlemode and multimode and is multimode Encircled Flux compliant.

CertiFiber Pro's Optical Loss Test Set (OLTS) double ended fiber optic inspection capability allows you to inspect and certify fiber optic connector end-faces at both ends of your fiber link in less than a second so you can get your job done the first time. This double ended fiber optic inspection capability provides automated PASS/FAIL certification, takes the guess work out of fiber inspection so anyone can be a fiber expert.

Report incorrect product information

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

All sales are final

These are made-to-order items.
This product is not eligible for return or exchange unless defective.
The average lead-time is 1 or 2 weeks.

Return and Warranty

Please note that return requests for Fluke Networks items must be submitted within 14 days after the delivery date.

Technical Details

Reviews

Title

Requirement

Operating Temperature

-10° C to 45° C

Storage Temperature

-10° C to +60° C

Operating Relative Humidity

% RH without condensation
0 % to 90 %, 32 °F to 95 °F (0° C to 35° C)
0 % to 70 %, 95 °F to 113 °F (35° C to 45° C)

Vibration

Random, 2 g, 5 Hz-500 Hz

Shock

1 m drop test with and without module and adapters

Safety

CSA C22.2 No. 1010.1: 1992

Altitude

Operating: 4,000 m; storage: 12,000 m

EMC

EN 61326-1

Source Wavelengths

850 nm, 1300 nm, 1310 nm, 1550 nm

Power Measurement Range

0 dBm to -65 dBm (850 nm) 0 dBm to -70 dBm (all other wavelengths)

Power Measurement Uncertaint

< +/- 5% +/- 32 pW

Measurement Linearity

< ± 0.1 dB

Input Connector

Interchangeable connector adapter (LC standard)

Detector Type

InGaAs

Integrated Wi-Fi

Meets IEEE 802.11 a/b/g/n; dual band (2.4 GHz and 5 GHz)

Singlemode

Testing Speeds (excludes referencing times)

Smart Remote mode: < 3 seconds (2 wavelengths, one direction, auto wavelength detection) Far End Source mode: ≤ 2 seconds (2 wavelengths, one direction auto wavelength detection) Loopback mode: ≤ 2 seconds (2 wavelengths, one direction auto wavelength detection)

Input/Output Connectors

Interchangeable connector adapter

Launch Condition

Encircled Flux compliant to TIA-526-14-B, ISO/IEC 14763-3 and IEC 61280-4-1

Fiber Types Tested

singlemode

Source Type and Wavelengths

Fabry-Perot laser diode 1310 nm ± 20 nm 1550 nm ± 30 nm

Maximum Length Measurement

130 km

Length Measurement Accuracy

± 1.5 m plus ± 1 % of length

Output Power (Nominal)

≥ -4 dBm

Output Power Stability

± 0.1 dB over 8 hours ± 0.08 dB over 15 minutes

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

Title

Requirement

Operating Temperature

-10° C to 45° C

Storage Temperature

-10° C to +60° C

Operating Relative Humidity

% RH without condensation
0 % to 90 %, 32 °F to 95 °F (0° C to 35° C)
0 % to 70 %, 95 °F to 113 °F (35° C to 45° C)

Vibration

Random, 2 g, 5 Hz-500 Hz

Shock

1 m drop test with and without module and adapters

Safety

CSA C22.2 No. 1010.1: 1992

Altitude

Operating: 4,000 m; storage: 12,000 m

EMC

EN 61326-1

Source Wavelengths

850 nm, 1300 nm, 1310 nm, 1550 nm

Power Measurement Range

0 dBm to -65 dBm (850 nm) 0 dBm to -70 dBm (all other wavelengths)

Power Measurement Uncertaint

< +/- 5% +/- 32 pW

Measurement Linearity

< ± 0.1 dB

Input Connector

Interchangeable connector adapter (LC standard)

Detector Type

InGaAs

Integrated Wi-Fi

Meets IEEE 802.11 a/b/g/n; dual band (2.4 GHz and 5 GHz)

Singlemode

Testing Speeds (excludes referencing times)

Input/Output Connectors

Interchangeable connector adapter

Launch Condition

Encircled Flux compliant to TIA-526-14-B, ISO/IEC 14763-3 and IEC 61280-4-1

Fiber Types Tested

singlemode

Source Type and Wavelengths

Fabry-Perot laser diode 1310 nm ± 20 nm 1550 nm ± 30 nm

Maximum Length Measurement

130 km

Length Measurement Accuracy

± 1.5 m plus ± 1 % of length

Output Power (Nominal)

≥ -4 dBm

Output Power Stability

± 0.1 dB over 8 hours ± 0.08 dB over 15 minutes

Return and Warranty

Please note that return requests for Fluke Networks items must be submitted within 14 days after the delivery date.

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

Fluke Networks CFP-SM-ADD Certifiber Pro Cable Finder, Singlemode

Identifiers

Return and Warranty

Technical Details

Return and Warranty

Reviews