| Measurement function | Alternating current |
| AC ampere range | 3 mA, 30 mA, 300 mA, 3 A, 30 A, 60 A |
| mA / A: manual selection
3 mA / 30 mA / 300 mA: automatic selection
3 A / 30 A / 60 A: automatic selection |
| Range / Resolution | 3 mA / 0.001 mA |
| 30 mA / 0.01 mA |
| 300 mA / 0.1 mA |
| 3 A / 0.001 A |
| 30 A / 0.01 A |
| 60 A / 0.1 A |
| Accuracy – filter activated (40 to 70 Hz), filter off (40 to 1 kHz)² | 3 mA – 30 A
60 A | 1% + 5 digits
2% + 5 digits |
| Frequency | 40 Hz to 1 kHz |
| Crest Factor | 3 |
After calibration accuracy is valid for one year. Accuracy is expressed as ± (% of reading + digits). Reference conditions 23 ±5 °C and a maximum relative humidity of 80%.
The minimum value is 10 μA rms.
²Outside of the TC / °C 18 °C to 28 °C, 0.02 + 1 |
| Physical |
| Display (LCD) | Digital readout: 3300 count |
| Display refresh rate | 4 times / sec |
| Maximum conductor diameter | 40 mm |
| Dimensions | 234 x 101 x 46 mm |
| Weight | 500 g |
| Battery | 2 AA, IEC LR6, NEDA 15A, alkaline |
| Battery life | Expected battery life, without using backlight and spotlight, is more than 150 hours |
| Automatic shut-down | Meter automatically shuts down after 15 minutes of inactivity |
| Safety and Environmental Specifications |
| General safety | IEC 61010-1: Pollution Degree 2 |
| Measurement safety | IEC 61010-2-032: CAT III 600 V / CAT IV 300 V |
| Operating temperature | -10 °C to +50 °C |
| Storage temperature | -40 °C to +60 °C |
| Operating humidity | Non-condensing (<10 °C) |
| 90% relative humidity (10 °C to 30 °C) |
| 75% relative humidity (30 °C to 40 °C) |
| 45% relative humidity (40 °C to 50 °C) |
| Protection class | IEC 60529: IP30 (jaw closed) |
| Operating altitude | 2000 m |
| Storage altitude | 12000 m |
| Current sensor action category | IEC 61557-13: Class 2, ≤30 A / m |
| Electromagnetic compatibility (EMC) |
| International |
| IEC 61326-1 | Industrial Electromagnetic Environment |
| CISPR 11 | Group 1 Class B |
| Group 1 | Generated inside the equipment and / or use radio frequency energy associated with conducting the energy for the device's own internal functions is essential. |
| Class B | Equipment for home appliances and residential buildings directly connected to a low voltage power supply network equipment. When this device is connected to a test object, it may exceed the emission levels produced by CISPR 11 requirements.
Korea (KCC): A type of equipment (radio and communication equipment industry) |
| Class A | This product meets the requirements of industrial electromagnetic equipment, vendors or users should be aware of this. This device is intended for use in a commercial environment, instead of the home environment.
USA (FCC): 47 CFR 15 B Subpart. In accordance with section 15.103 provides that the products are considered tax-free device. |
