CyberPower Systems, PDU30SWHVT19ATNET, Switched ATS Power Distribution Unit, 200/240V
PDU30SWHVT19ATNET Includes Only:
- ATS PDU
- 2 Mounting Brackets
- 24 M4x8 Bracket Mounting Screws
- 6 M5x12 Rack Mounting Screws
- 6 Washers
- 2 Cord Retention Trays
- 4 M3x4 Cord Retention Tray Mounting Screws
- RJ45/DB9 Serial Port Connection Cable
- Jumper
- User Manual
- Registration Card
- CD
- 4 IEC Socket Power Cord Stands
- 29 M3x4 Screws
- 27 Power Cord Retention Cable Clip
- 27 Cable Ties
Features:
- Delivers AC power to servers, equipment, and connected devices via a power distribution unit.
- Output receptacles can be turned on, turned off, or recycled on demand or at programmed times to address a number of needs, including remote rebooting of locked equipment, load shedding, power sequencing, and locking out unauthorized loads.
- Dual power cords (A & B) provide redundant power sources to devices with single power supplies and can be plugged into separate compatible sources* to ensure continuous access. Users select the preferred source as the primary input. CyberPower Smart App Online and Sinewave series UPS are highly recommended for use as the power source.
- Provides real-time meter status for current (amperes), input and output voltages, power consumptions (kilowatts), and hardware/firmware versions.
- Are updatable to the latest versions by using the serial communication port and cable.
- Used to update/upgrade the hardware and LCD firmware.
- Provides outlet control, remote monitoring, reporting, and event notifications, via Email, SMS Text, or SNMP Trap. RMCARD203 firmware is upgradeable with FTP process.
- This Switched ATS PDU provides protocol support for PowerPanel Business Edition, HTTP, TCP/IP, UDP, DHCP, and SNMP including SNMPv3, and IPv4, IPv6, NTP, SMTP protocols.
- Administrator and user rights can be established to provide IT personnel with access to the Management Console via a web browser to monitor and/or manage the PDU settings.
- Designed without a power switch and circuit breaker (on most models) to prevent accidental power interruptions.
- Highly durable construction ensures the efficient distribution of power in demanding IT or industrial environments to servers, equipment, and connected devices.
- Allow for 2U horizontal rack installation.
- Secures power cords, keeping them organized and accessible. Helps cords stay plugged in.
The CyberPower PDU30SWHVT19ATNET, a 19-outlet (rear), 2U rackmount switched automatic transfer switch (ATS) power distribution unit (PDU), provides 200-240V 30A output. It distributes unfiltered electrical pass-through to to 19 receptacles--16 IEC-320 C13, 2 IEC-320 C19, and 1 NEMA L6-30R receptacles-from redundant NEMA L6-30P plugs. Dual power cords can be plugged into separate power sources to provide redundancy to single-corded connected equipment. If power for the primary source exceeds the lower or upper thresholds, or if power fails, the PDU will switch to the secondary power source to ensure continuous operation. The PDU will switch back to the primary power source when incoming power becomes stable. The PDU30SWHVT19ATNET includes a SNMP/HTTP card (RMCARD203). With the SNMP card and an IP address on the network interface, users have real-time monitoring and outlet control of the PDU. The switched outlet receptacles can be managed individually or collectively. The LCD panel provides local monitoring of the PDU and on/off control for the outlets. It can also be used to measure the electrical current (displayed in amperes) used by connected equipment. The LCD panel also shows input and output voltages, active power consumption levels (displayed in kilowatts), and hardware and firmware versions.
