Ethernet Ports | - SFP Ports: (8) 100/1000BASE-FX
- Electrical Ports: (16) 10/100/1000BASE-T(X), with Auto MDI/MDIX
- Optical Bypass: LC Connector 4 duplex singlemode
- Wavelength:
- Single mode 1260/1570 nm
- Multimode 850nm
|
Ethernet Standards Supported | - IEEE 802.3 for 10BASE-T
- IEEE 802.3u for 100BASE-TX and 100BASE-FX
- IEEE 802.3ab for 1000Base-T
- IEEE 802.3az for Energy Efficient Ethernet
- IEEE 802.3z for 1000BASE-X
- IEEE 802.3x for Flow control
- IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
- IEEE 802.1p for COS (Class of Service)
- IEEE 802.1Q for VLAN Tagging
- IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
- IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
- IEEE 802.1x for Authentication
- IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
|
Switch Properties | - Switching Latency 7 μs
- Switching Bandwidth 48 Gbps
- Max. VLANs 256
- IGMP Multicast Groups 128 for each VLAN
- Port Rate Limiting User Defined
- MAC Table 8000 MAC addresses
- Priority Queues 8
- Processing Store-and-Forward
- Jumbo Frame Supports 9.6K
|
Alarms & Monitoring Systems | - Relay Output: Capacity of 1A at 24VDC
- Serial Console RJ-45 Port: RS-232 at 115,200 bps with console cable
|
Software Features | - STP/RSTP/MSTP (IEEE 802.1D/w/s)
- C-Ring Redundant Ring: Recovery time < 30ms, with over 250 units
- TOS/Diffserv Supported
- Media Redundancy Protocol (MRP)
- VLAN (802.1Q) with VLAN Tagging and GVRP Supported
- IGMP Snooping
- IP-Based Bandwidth Management
- DOS/DDOS Auto-Prevention
- Port Configuration, Status, Statistics, Monitoring & Security
- DHCP Server / Client support
- SMTP Client
- Modbus TCP
|
Security Features | - Device Binding Security Feature
- Enable/Disable Ports, MAC based port security
- Port-Based Network Access Control: 802.1x
- VLAN (802.1Q): To segregate and secure network traffic
- Radius Centralized Password Management
- SNMPv3 Encrypted Authentication and Access Security
- HTTPS/SSH enhanced network security
|
Network Redundancy | C-Ring, Legacy Ring, C-Chain, MRP, Fast Recovery, MSTP (STP / RSTP Compatible) |
LED Status Indicators | - Power Indicators: 3
- R.M. Indicator: Indicates switch is operating in C-Ring master mode
- Ring Indicator: Indicates switch is operating in C-Ring mode
- Fault Indicator: Indicates a fault/failure event has occurred within the switch and/or network itch
- RJ-45 Port Indicator: For port/link activity & 100 Mbps indication
- SFP Port Indicator: For port/link activity
|
Regulatory Approvals | - EMI: FCC Part 15, CISPR (EN55022) Class A
- ESD: EN61000-4-2
- RS: EN61000-4-3
- EFT: EN61000-4-4
- Electrical Surge: EN61000-4-5
- CS: EN61000-4-6, EN61000-4-8, EN61000-4-11
- Mechanical Shock: IEC60068-2-27
- Free Fall: IEC60068-2-32
- Vibration: IEC60068-2-6
- Safety: EN60950-1
|
Fault Alarm Relay | Relay Contact Rating: 24 VDC at 1 A |
Power | - Input Power: Redundant dual inputs in one power socket
- Operating Voltage Range: 100 to 240 VAC
- Power Consumption, Typical: 25 W
- Current Protection: Overload Current Protected
- Power Connector: Terminal Block
|
Electrical & Mechanical | - Size: 11.81 x 6.5 x 3.47 in (30 x 16.5 x 8.8 cm)
- Shipping Weight: 5.13 lbs / 2.4 kg
|
Environmental | - MTBF: >100,000 hours
- Operating Temperature: -40° to +70°C
- Storage Temperature: -40° to +85°C
- Relative Humidity: 5% to 95% (non-condensing)
|