Clear-Com, MS-802-IM, Encore 800 2 Chanels Main Station with Programmable Front Panel Buttons
Features:
- Supports up to 55 beltpacks or 10 speaker stations on two channels
- IP-20 environmental rating
- Asbestos-free in accordance with SOLAS Regulation II-I/3-5.2
- Marine Certification compliant with DNVGL-CG-0339 (2016)
- Separate short-circuit protection for each channel
- Dual-action electronic momentary/latching Talk buttons
- Program feed to both channels, with selectable Program Interrupt (IFB)
- Call signal buttons for each channel
- Remote Mic Kill
- Announce output with relay
- Microphone limiting
- Volume controls for each channel
- Visual and audible Tone Alert signaling
- Channels A & B Link switch
- Built-in speaker
- External switchable line termination on each channel
- Universal voltage power supply
Industrial and Marine products for use in harsh environments, certified in accordance with DNVL-CG-0339, with Compass Safety Distance conformity, and asbestos-free.
The MS-802-IM is a 1RU two-channel main station with programmable front panel buttons, individual channel short-circuit protection, individual channel volume control, and a regulated fail-safe power supply. The MS-802-IM supports up to 55 beltpacks or 10 speaker stations.
Monitoring System
The MS-802-IM can monitor intercom activity on one or both channels with individual listen-level controls. Monitoring intercom activity is possible through a headset or the internal loudspeaker.
Talk Selection
The MS-802-IM has mic pre-amps with limiters and speech-shaping circuits. An individual electronic momentary/latching Talk button is available for each channel. Illuminated dual-action Talk buttons light an LED dimly when latched: blue-color while in standby, amber-color when latched. The latching feature can be disabled. The channels can be accessed separately or simultaneously without tying them together. A selector switchtoggles between the headset or microphone. The Talk buttons can also be controlled with a footswitch.
Announce Output
For paging, the MS-802-IM provides a balanced, line-level output signal to a 1/4-inch TRS connector on the rear panel. The front panel Announce button activates the output and the Announce relay. The relay circuit, on a separate 1/4-inch TRS connector, is typically used tomute monitors.
Call Signaling
The MS-802-IM has individual Call buttons with visual call signaling for each channel on the partyline. The visual signal will flash brightly and will emit an audible signal if the remote station operator holds the Call button for more than 2 seconds. The call signaling featurecan be programmed to the Talk buttons.
Remote Mic Kill (RMK)
The MS-802-IM has a global Remote Mic Kill button. It will turn off the microphone talk circuits of all beltpacks on the system, eliminating extraneous noise from the open headset microphones.
Program Input and Interrupt (IFB)
The MS-802-IM accepts a line-level external program input for monitoring in the headset and speaker, and/or mixing with intercom audioon either or both channels. When Interrupt is selected, the program signal is interrupted when the Talk button is pressed.
Power
The MS-802-IM has a visual indication of power supply conditions. In the event of a short circuit or current overload on a channel, thatchannel will shut down while the other one continues to operate. As soon as the fault condition is removed, the auto-reset circuitry willrestore power to that channel, even under full-load conditions.
For more information, please see 
Data Sheet
