| Capacity |
| Beltpacks per Base Station | 16 BPs (FSII or FSE) |
| Transceivers/Antennas Supported by Base | 6 x IPT or FSE TCVR and 10 x E1 TCVRs (1.9 or 2.4GHz) |
| Headset Microphone Input |
| Input Type | Dynamic /Electret – Selectable |
| Frequency Response | Headset Mic – Partyline: 200Hz – 12kHz + 3dBu |
| Frequency Response | Headset Mic – Line Out: 200Hz – 20kHz + 3dBu |
| Mic Limiter Threshold | -50dBu ±3dB |
| Mic Limiter Range | ≥ 20dB |
| Max Input Level | -25dBu |
| Input Level | -60dBu nominal; -25dBu MAX |
| Headset Mic Voltage | 5V (Electret selectable) |
| Headset Output |
| Load Impedance | > 32Ω |
| Output Impedance | 33Ω |
| Max Output Level before Distortion | > 13dBu |
| Total Harmonic Distortion (THD) | < 0.1% THD at 1kHz |
| Headset Mic – Partyline | -78dBu (Clear-Com mode) |
| Headset Mic – Line Out | -60dBu |
| Frequency Response | Partyline – Headset Out: 200Hz – 10kHz + 3dBu |
| Audio/Radio |
| 4-wire I/O | Output Impedance >10kΩ, Input Impedance 200Ω + 10%, transformer isolated balanced input and output. |
| 4-wire Operating Levels | 0dBu Nominal, 18dBu headroom |
| 2-wire I/O | Selectable RTS or Clear-Com mode, Software controlled auto-null, null depth >60dB at 1kHz |
| 2-wire Operating Levels | -18dBu nominal (Clear-Com Mode), -12dBu nominal (RTS Mode), Headroom 18dB |
| Freespeak Edge Beltpack | 200Hz – 12kHz |
| Freespeak II Beltpack | 200Hz – 7.1kHz |
| Partyline I/O |
| 2W Power On/Off | A/B, C/D paired- software controlled |
| 2W Output Voltage | 25 – 28V DC, 560 mA per pair (A/B or C/D) |
| 2W Impedance | >10kΩ |
| 2W Frequency Response | 200 to 12kHz. ±3dB |
| 2W Total Harmonic Distortion (THD) | < 0.1% THD at 1 kHz |
| Relay Contacts or GPIO |
| Connector Type | 2 x DB9 |
| Relay Contact Type | SPDT |
| Relay Quantity | 4 |
| Relay Contact Voltage Rating | 30V DC |
| Relay Contact Current Rating | 1A |
| Input Type | Opto-Isolated |
| Input Quantity | 2 |
| Input Voltage Range | 4 – 30 volts DC or AC |
| Input Current | >=1.2mA required |
| Connectors |
| 4-wire I/O | (8) RJ45 |
| 2-wire I/O | (4) XLR-3F |
| Program Input | XLR-3M, provided using cable assembly CAB-RJ45-PGM-SA |
| Stage Announce Output | XLR-3F, provided using cable assembly CAB-RJ45-PGM-SA |
| Headset | Freespeak Edge Base: 4-pin XLR-M, auto headset detect |
| USB | USB type A Receptacle |
| Number of E1 antenna ports | 2 x RJ45, 2 x Fiber (2 active at any time) |
| DECT Radio frequency sync | Rear RJ45 input and output RF sync connectors |
| Indicators and Function |
| Displays | (2) 480 x 128 color TFT LED Touch Screen displays |
| Front Panel Indicators & Function | - (2) Power Supply Status LEDs
- (1) Status LED (Edge)
- (1) Three Color Level Control LED Array
|
| AC Mains input | 100-240V AC, 50-60Hz, 160W Max, IEC60320 C14 inlet. |
| DC Low Voltage Input | 12V DC +/- 5%, 12A |
| Input | 100-240V AC, 50-60Hz, 2.2A Max, IEC60320 C14 inlet. |
| Output | 12V DC +/- 5%, 12.5A |
| Environmental |
| Operating | 32° to 113°F (0° to 45°C) |
| Storage | 86° to 158°F (30° to 70°C) |
| Humidity | 20-90% Non-Condensing |
| Dimensions |
| Size | 19 x 1.72 x 13.929in (WxHxL) (43.6 x 482.6 x 353.8mm) |
| Depth | 260mm |
| Weight | 7.25lbs (3.29kg) |
