BZBGEAR, BG-UHD-MVS42MA, 4x2 Quad Multiviewer, 4K60, 18Gbps with Seamless Matrix Switcher and Audio De-Embedder
BG-UHD-MVS42MA Includes Only:
- 1 x 4K60 4x2 Multiviewer Seamless UHD Video Matrix Switcher
- 1 x IR Remote
- 1 x 3pin-3.81mm Phoenix Connector (male)
- 1 x 38KHz IR Wideband Receiver Cable (1.5 meters)
- 2 x Mounting Ears
- 4 x Machine Screws (KM3*4)
- 1 x 12V/2.5A Locking Power Adapter
- 1 x User Manual
Features:
- Secure content: HDMI 2.0b, HDCP 2.2, and HDCP 1.x compliant
- 4K Resolution: Input and output resolutions support up to 4K2K at 60 4: 4: 4
- Audio management: Volume control and independent audio selection
- EDIDManagement: Seamless scaling for the best results
- Control: Control via front panel buttons, IR remote, RS-232 commands
- Compact design: For easy and flexible installation
- 18Gbps video bandwidth
- LPCM, AC3, DD+, DTS, DTS-HD, up to 7.1 audio channel
- Seamless switching between input channels and combining multiple images on a single UHD monitor
- Up to 8 display modes: SINGLE, PIP, PBP (1), PBP (2), Triple (1), Triple (2), Quad (1), Quad (2)
- Seamless switching on single-screen display mode
- Fast switching on multiview display mode
- Audio de-embedding via analog and Optical fiber audio ports
- OSD navigation for advanced settings
The 4K at 60 4x2 Multiviewer Seamless UHD Video Matrix Switcher is designed to allow you to display multiple video sources at 4K resolution on two screens. It combines four video signals and allows you to manage each input, create combinations of the four inputs, and adjust their positions on the displays.
Besides instant switching between 4 sources and routing to two displays the BG-UHD-MVS42MA has the ability to display the four video inputs in a Picture-in-Picture (PIP) or Picture-by-Picture (PBP) mode. In PIP mode, one of the video inputs is displayed as a small inset window on top of the other input, which takes up the majority of the screen. In PBP mode, the four video inputs are displayed side-by-side, taking up equal or partial amounts of screen space.
Connectivity and Quality
This device supports a wide range of input resolutions up to 4096x2160p 60Hz. It also could de-embed audio from any of the sources in different formats for your external audio system. Supported audio formats are LPCM, AC3, DD+, DTS, DTS- HD. Users can control the volume of audio in LPCM format.
Interfaces:
- Power button: Short press this button to power on the device. Long press this button for 1 second to enter the standby mode.
- Power LED: The Power LED will illuminate green when the product is powered on and red when the product is in standby.
- OUT 1 LEDs: Signal source indicator for HDMI OUT 1 port. In single screen display mode when the HDMI OUT 1 port outputs a signal from one of the HD 1/2/3/4 inputs the corresponding green LED will illuminate. In multiview mode all OUT 1 LEDs will illuminate green.
- OUT 2 LEDs: Signal source indicator for HDMI OUT 2 port. In single screen display mode when the HDMI OUT 2 port outputs a signal from one of the HD 1/2/3/4 inputs the corresponding green LED will illuminate. In multiview mode all OUT 2 LEDs will illuminate green.
- IR Window: IR signal receiving window.
- OUT 1 button: Input source switching button for the HDMI OUT 1 port.
- OUT 1 Multiview button: Multiview display mode switching button for the HDMI OUT 1 port. Short press this button to cycle select: Single-PIP-PBP (1) -PBP (2) -Triple (1) -Triple (2) -Quad (1) -Quad (2) -single. Long press this button for 3 seconds to switch the aspect ratio (16: 9/Full) for PBP (1) / PBP (2) / Triple (1) / Triple (2) / Quad (1) / Quad (2).
- OUT 1 RES button: Output resolution switching button for the HDMI OUT 1 port. Short press the RES button to cycle switch the output resolution of the HDMI OUT 1 port (Please refer to the output resolution list of "Video & Audio"). Long press the RES button for 3 seconds to switch the output resolution to 720P60.
- OUT 2 button: Input source switching button for the HDMI OUT 2 port.
- OUT 2 Multiview button: Multiview display mode switching button for the HDMI OUT 2 port. Short press this button to cycle select: Single-PIP-PBP (1) -PBP (2) -Triple (1) -Triple (2) -Quad (1) -Quad (2) -single. Long press this button for 3 seconds to switch the aspect ratio (16: 9/Full) for PBP (1) / PBP (2) / Triple (1) / Triple (2) / Quad (1) / Quad (2).
- OUT 2 RES button: Output resolution switching button for the HDMI OUT 2 port. Short press the RES button to cycle switch the output resolution of the HDMI OUT 2 port (Please refer to the output resolution list of "8. Video & Audio"). Long press the RES button for 3 seconds to switch the output resolution to 720P60.
- L/R OUT 1: PCM 2.0 Analog audio output port.
- Optical OUT 1: Optical fiber digital audio output port.
- HDMI OUT 1: Connect to an HDMI display device such as a TV or Monitor with HDMI cables.
- L/R OUT 2: PCM 2.0 Analog audio output port.
- Optical OUT 2: Optical fiber digital audio output port.
- HDMI OUT 2: Connect to an HDMI display device such as a TV or Monitor with HDMI cables.
- HD 1-4 INPUT ports: Connect to an HDMI source device such as Game Console or Set-top box with HDMI cables.
- RS-232 port: 3-pin phoenix connector, connected to a PC or control system for serial port upgrade or RS-232 command control.
- IR EXT port: If the IR signal receiving window of the unit is blocked or the unit is installed in a closed area out of infrared line of sight, the IR receiver cable can be inserted to the "IR EXT" port to receive the IR remote signal.
- DC 12V: DC 12V/2.5A power input port.
