BZBGEAR, BG-UHD-MVS41A, 4x1 Quad Multiviewer, 4K60, 18Gbps with Seamless Switcher and Audio De-Embedder
BG-UHD-MVS21A Includes Only:
- 1 x 4K60 4x1 Multiviewer Seamless UHD Video Switcher
- 1 x IR Remote
- 1 x 3pin-3.81mm Phoenix Connector (male)
- 1 x 38KHz IR Wideband Receiver Cable (1.5 meters)
- 2 x Mounting Ears
- 4 x Machine Screws (KM3*4)
- 4 x Rubber Feet
- 1 x 12V/2.5A Locking Power Adapter
- 1 x User Manual
Features:
- Secure content: HDMI 2.0b, HDCP 2.2, and HDCP 1.x compliant
- 4K Resolution: Input and output resolutions support up to 4K2K at 60 4: 4: 4
- Audio management: Volume control and independent audio selection
- EDIDManagement: Seamless scaling for the best results
- Control: Control via front panel buttons, IR remote, RS-232 commands
- Compact design: For easy and flexible installation
- 18Gbps video bandwidth
- LPCM, AC3, DD+, DTS, DTS-HD, up to 7.1 audio channel
- Seamless switching between input channels and combining multiple images on a single UHD monitor
- Up to 8 display modes: SINGLE, PIP, PBP (1), PBP (2), Triple (1), Triple (2), Quad (1), Quad (2)
- Seamless switching on single-screen display mode
- Fast switching on multiview display mode
- Audio de-embedding via analog and Optical fiber audio ports
- OSD navigation for advanced settings
The 4K at 60 4x1 Multiviewer Seamless UHD Video Switcher is designed to allow you to display multiple video sources at 4K resolution on a single screen. It combines four video signals and allows you to manage each input, create combinations of the four inputs, and adjust their positions on the display.
Besides instant switching between 4 sources, the BG-UHD-MVS41A has the ability to display the four video inputs in a Picture-in-Picture (PIP) or Picture-by-Picture (PBP) mode. In PIP mode, one of the video inputs is displayed as a small inset window on top of the other input, which takes up the majority of the screen. In PBP mode, the four video inputs are displayed side-by-side, taking up equal or partial amounts of screen space.
Connectivity and Quality
This device supports a wide range of input resolutions up to 4096x2160p 60Hz. It also could de-embed audio from any of the sources in different formats for your external audio system. Supported audio formats are LPCM, AC3, DD+, DTS, and DTS- HD. Users can control the volume of audio in LPCM format.
Interfaces:
- Power button: Short press this button to power on the device. Long press this button for 1 second to enter standby mode.
- Power LED: The Power LED will illuminate green when the product is powered on, and red when the product is on standby.
- Input 1-4 LEDs: Input signal indicator lights. When the HD 1/2/3/4 port connects to an active source device, the corresponding green LED will illuminate.
Note: Only the LED of the selected input channel will illuminate green during single screen display mode; all LEDs will illuminate green in multiview mode. - AUTO LED: When the device is set to AUTO mode, the AUTO LED will illuminate green, and the HDMI will be automatically identified, that is, when the currently displayed source signal is disconnected, the switcher will automatically identify the next connected HDMI input port.
- IR Window: IR signal receiving window.
- AUTO button: Automatic switching button.
- INPUT button: Input source switching button.
- Multiview button: Multiview display mode switching button. Short press this button to cycle select: SINGLE - PIP - PBP (1) - PBP (2) - Triple (1) - Triple (2) - Quad (1) - Quad (2). Long press this button for 3 seconds to select the aspect ratio for PBP (1) / PBP (2) / Triple (1) / Triple (2) / Quad (1) / Quad (2).
- RES button: Output resolution switching button. Short press the RES button to cycle switch the output resolution of the HDMI OUTPUT port (Please refer to the output resolution list in the "Video & Audio" section of this manual). Long press the RES button for 3 seconds to switch the output resolution to 720P60.
- L/R port: PCM 2.0 Analog audio output port.
- Optical port: Optical fiber digital audio output port.
- HDMI OUTPUT port: Connect to an HDMI display device such as a TV or Monitor with an HDMI cable.
- HD 1-4 INPUT ports: Connect to HDMI source devicse such as Game Consoles or Set-top boxes with HDMI cables.
- RS-232 port: 3-pin phoenix connector, connected to a PC or control system for serial port upgrade or RS-232 command control.
- IR EXT port: If the IR signal receiving window of the unit is blocked or the unit is installed in a closed area out of infrared line of sight, the IR receiver cable can be inserted to the "IR EXT" port to receive the IR remote signal.
- DC 12V: DC 12V/1A power input port.