BZBGEAR BG-EXH-100C6 4K 18Gbps HDMI HDBaseT 3.0 Extender

BZBGEAR, BG-EXH-100C6, 4K 18Gbps HDMI HDBaseT 3.0 Extender with IR/eARC/ARC/PoC/RS-232/Ethernet/USB and Audio Embedding/De-embedding Up to 330ft

BG-EXH-100C6 Includes Only:

• 1 x HDBaseT 3.0 Extender (Transmitter)
• 1 x HDBaseT 3.0 Extender (Receiver)
• 1 x IR Blaster Cable (1.5 meters)
• 1 x IR Receiver Cable (1.5 meters)
• 2 x 3pin-3.81mm Phoenix Connectors
• 4 x Mounting Ears
• 8 x Machine Screws (KM3*4)
• 1 x 24V/1A Locking Power Supply
• 1 x User Manual

Features:

• HDMI Loop-out: Loop-out to view content locally at the transmitter side
• Bi-directional IR: Control devices via IR either from the receiver or transmitter
• HDCP 2.2: High-Bandwidth Digital Content Protection Support
• Rich color contrast: HDR, HDR10, HDR10+, Dolby Vision, and HLG supported
• Stunning image quality: Crystal clear images at 4K 60Hz 4: 4: 4
• Power over cable: Power only needs to be supplied to the either transmitter or receiver allowing for easier installation
• Transmit signals up to 328ft (100m)
• HDMI ARC from receiver to transmitter
• Utilize two USB 2.0 ports on both transmitter and receiver
• LED lights on transmitter and receiver to verify connection status at a glance
• Audio Embedding and de-embedding through S/PDIF Optical port and 3.5mm stereo mini on transmitter
• 1Gbps LAN ports on the receiver and transmitter to connect extra devices to a network

Experience unparalleled audio and video transmission with the BG-EXH-100C6 HDBaseT 3.0 extender by BZBGEAR. This state-of-the-art device unleashes uncompressed HD/UHD audio and video, along with eARC/ARC, RS-232, bi-directional IR, 1Gb Ethernet, and USB 2.0 signals up to an impressive distance of 328ft (100m) using just a single CAT6A/7 cable. Say goodbye to messy wires and hello to convenience.

With USB 2.0 host/device reconfigurability, the BG-EXH-100C6 offers maximum flexibility and functionality, making it the perfect solution for a KVM setup. And, with bi-directional power over cable (PoC), there's no need for a second power adaptor, saving you time and money.

The BG-EXH-100C6 can support resolutions up to 4K at 60Hz 4: 4: 4, and boasts HDR10, HDR10+, Dolby Vision, and HLG technology, ensuring unparalleled picture quality. The transmitter can embed or de-embed audio, while the receiver supports audio de-embedding. Plus, with eARC/ARC from the receiver's HDMI output, you can enjoy top-notch audio quality on your local audio system, or opt to use the transmitter's HDMI audio only and SPDIF output ports.

BG-EXH-100C6 by BZBGEAR is the ultimate choice for anyone seeking a top-of-the-line audio and video extender. With its advanced features and unparalleled performance, it's sure to exceed your expectations.

Interfaces:

1. Power LED: Red LED indicates that the Transmitter is powered on.
2. LINK LED:
   • The light on: Transmitter and Receiver are in good connection status.
   • Light flashing: Transmitter and Receiver are in Low Power Mode.
   • Light off: The Transmitter and Receiver are not connected.
3. VIDEO LED:
   • Light on: The video is encrypted.
   • Light flashing: The video is not encrypted.
   • Light off: No HDMI input.
4. ARC LED:
   • Light on: The device is switched to the ARC mode
   • Light off: The device is switched to the SPDIF mode.
5. SPDIF LED:
   • Light on: The device is switched to SPDIF mode.
   • Light off: The device is switched to the ARC mode.
6. SELECT button: Used for switching the ARC mode and SPDIF mode.
7. L/R IN/OUT switch: Switch to left, the L/R IN/OUT port is the audio embedding port; Switch to right, the L/R IN/OUT port is the audio de-embedding port.
8. LOOP OUT/ AUDIO ONLY switch: Switch to left (LOOPOUT), the HDMI OUT port is the loopout port for the HDMI IN port; Switch to right (AUDIO ONLY), the HDMI OUT port outputs 720P black screen image, and the audio is from ARC or SPDIF.
9. HOST/ DEVICE USB switch: Switch to left (HOST), the USB HOST mode is enabled; Switch to right (DEVICE), the USB DEVICE mode is enabled.
10. USB DEVICES: Two USB device ports, connected to U disk, mouse or keyboard.
11. USB HOST: USB extension host port, connected to PC.
12. SERVICE: Firmware update port.
13. DC 24V: DC 24V/1A power supply input port.
14. LAN: 1G Network port. When it switches to Gigabit Ethernet, the green indicator lights on; When it switches to 100M Ethernet, the yellow indicator lights on.
15. Data Signal Indicator (Yellow):
    • Illuminating: HDMI signal with HDCP.
    • Flashing: HDMI signal without HDCP.
    • Dark: No HDMI signal.
16. HDBT OUT: 10G Network port, connected to the HDBT IN port of the Receiver with a CAT 6A/7 cable. It is used for various signal pass-throughs.
17. Link Signal Indicator (Green):
    • Illuminating: Transmitter and Receiver are in good connection status.
    • Flashing: The transmitter and Receiver are in poor connection status.
    • Dark: Transmitter and Receiver are not connected.
18. HDMI IN: HDMI signal input port, connected to the signal source device, supporting eARC/ARC amplifier.
19. HDMI OUT: HDMI signal loopout port. It can choose to be a LOOP OUT or AUDIO ONLY port through the LOOP OUT/AUDIO ONLY switch.
20. L/R IN/OUT: Audio embedding/de-embedding port. It can be used for audio embedding/de-embedding through the L/R IN/OUT switch.
21. SPDIF OUT: Optical output port.
22. IR IN: IR signal input port, connected to IR Receiver cable.
23. IR OUT: IR signal output port, connected to IR Blaster cable.
24. RS-232: RS-232serial port, used for serial port command transmission.
25. Power LED: Red LED indicates that the Receiver is powered on.
26. LINK LED:
    • Light on: Transmitter and Receiver are in good connection status.
    • Light flashing: Transmitter and Receiver are in Low Power Mode.
    • Light off: The Transmitter and Receiver are not connected.
27. VIDEO LED:
    • Light on: The video is encrypted.
    • Light flashing: The video is not encrypted.
    • Light off: No HDMI input.
28. ARC LED:
    • Light on: The device is switched to the ARC mode.
    • Light off: The device is switched to the SPDIF mode.
29. SPDIF LED:
    • Light on: The device is switched to SPDIF mode.
    • Light off: The device is switched to the ARC mode.
30. SELECT button: Used for switching the ARC mode and SPDIF mode.
31. DEVICE/ HOST USB switch: Switch to the right (HOST), and the USB HOST mode is enabled; Switch to the left (DEVICE), and the USB DEVICE mode is enabled.
32. USB DEVICES: Two USB device ports, connected to U disk, mouse or keyboard.
33. USB HOST: USB extension host port, connected to PC.
34. SERVICE: Firmware update port.
35. DC 24V: DC 24V/1A power supply input port.
36. LAN: 1G Network port. When it switches to Gigabit Ethernet, the green indicator lights on; When it switches to 100M Ethernet, the yellow indicator lights on.
37. Data Signal Indicator (Yellow):
    • Solid: HDMI signal with HDCP.
    • Flashing: HDMI signal without HDCP.
    • Dark: No HDMI signal.
38. HDBT IN: 10G Network port, connected to the HDBT OUT port of the Transmitter with a CAT 6A/7 cable. It is used for various signals pass-through.
39. Link Signal Indicator (Green):
    • Solid: The transmitter and Receiver are in good connection status.
    • Flashing: Transmitter and Receiver are in poor connection status.
    • Dark: Transmitter and Receiver are not connected.
40. HDMI OUT: HDMI signal output port, supporting eARC/ARC TV.
41. L/R OUT: Audio de-embedding output port.
42. SPDIF IN: Optical input port.
43. IR IN: IR signal input port, connected to IR Receiver cable.
44. IR OUT: IR signal output port, connected to IR Blaster cable.
45. RS-232: RS-232 serial port, used for serial port command transmission.