Features:
- 304 stainless steel construction
- Mirror polish finish
- Interior welds are the best in the business - uniquely ground and polished
- (3) Horizontal welded cone ports
- (1) 4" TC Lid Opening
- (2) 1.5" TC Lid Openings
- 2" TC bottom dump with 2" TC butterfly valve
- 1.5" Thermowell for inserting thermal probe
- Strong welded in place handles
- (4) Adjustable feet
- Silicone tube for blow off
- Stainless lid clamp & one piece molded gasket
- Built-in 15 psi PRV (Not sufficient for fermentation - optional Pressure Fermentation Kit required for pressure fermentations)
- Internally etched volume markers
- Highest quality mirror finish.
- Welded, ground and polished interior welds are the very highest quality and the ultimate for sanitation.
- Four crossbar reinforced legs are superior for stability, mimicking Pro Uni Tanks.
- Horizontal ports on the cone, just like pro tanks, allowing your racking arm, carbstone, and thermometer to have a horizontal placement in your tank. This allows for smaller minimum batch sizes, better carbonation, and more.
- Pressure Relief Valve with pull ring built into the lid.
The BrewBuilt X2 Uni Conical was born of thousands of hours of research, contemplation, and development. The engineers and critical minds behind its realization scoured years of feedback from home and professional brewers alike to determine the ideal feature set of a stainless steel conical fermenter. The end result is a unit purpose-built to advance your fermentation process, improve the quality of your finished beer, and look good doing it. This is the brewing sidekick that you'll brag to your friends about.
Extra Large 2" T.C. Dump Valve
Dry hop to your heart's desire. Try as they might, hopheads will have a hard time clogging this conical. With an oversized 2" bottom port, you'll have all the clearance you need (and even more than some pro brewers) to drop out your dry hop additions with ease. The slick mirror-polish finish on the inside allows flocculating yeast to collect neatly at the bottom of the cone as they slide right down the smooth interior walls. The butterfly dump valve integrates perfectly with the optional Flex Chamber Trub Separator and Yeast Harvester.
Reinforced Four-Leg Foundation
There's a common complaint seen in the feedback for other conicals on the market-the tippiness of three-legged units. Three legs may be fine when the fermenter is sitting still on an even surface, but users are often forced to purchase a bracing shelf for more stability if they add casters or leg extensions. A conical is only as worthy as its foundation, so BrewBuilt modeled the X2 after professional-level brewery tanks with a four-leg, reinforced base. This seemingly small design feature is more expensive to produce, but it's what makes the X2 conical exceedingly stable when compared to other models. When you fill up your fermenter with delicious fresh wort, you want to trust the vessel that's holding your latest creation. Brewers shouted from the mountaintop that they wanted stronger, sturdier legs right out of the box that don't require an additional bracing shelf. The four-leg, welded-bar reinforced system is absolutely rock solid. This is an especially critical feature if you plan to add rolling casters so can easily glide the fermenter around your brewery.
The reinforced four-leg design not only increased the stability and strength of the conical, it also allowed the unit to stand taller, thereby eliminating the need for extensions in almost every situation. An elbow, a sight glass, or the Flex Chamber can be mounted under the unit with room to spare.
Adjustable Feet
The X2 Uni comes standard with reinforced thread-in adjustable feet. If your home brewery has uneven flooring, you can quickly and easily level out the fermenter. The feet can be swapped out with high-quality casters at any time.
