Babbitt International, LS8000-115VAC-H-10", Full-Featured Switch with Remote Electronics, 115VAC, Halar Probe, 10"
Features:
- Ignores significant product build-up
- Solid state, no moving parts
- Simple installation and calibration
- Explosion proof housing standard
- Built-in static protection
- User-programmable time delay
- Remote mounted electronics
Applications:
- High or low-level alarms
- Auto tank filling
- Sump control
- Oil/water interface detection
- Dry pump protection
- Liquids:
- Waste/Wastewater
- Acids/Caustics
- Fuels/Oils
- Slurries
- Interfaces:
- Dry Solids:
- Flour/Grains
- Powders
- Plastics
- Sand/Cement
- Wood Chips
- Fly Ash
The LS8000 remote-mounted level switch is the perfect choice when it is unsafe or inconvenient to mount the electronics directly to the probe. All calibration, time delay, and fail-safe adjustments are located on the remote electronics card, which can be mounted up to a mile away. The ultra-sensitivity adjustment on the LS8000 level switch allows sensing of the driest powders, fines, and flakes. The LS8000 is perfect for materials such as dry herbicides, plastic pellets, wood chips, and fly ash, as well as virtually any liquid or fluid interface application. This unit has no moving parts, making it an excellent replacement for floats, rotating paddles, or other mechanical devices.
The probe consists of a maintenance-free epoxy-encapsulated transmitter mounted in an explosion-proof housing. The transmitter is connected to the receiver with a twisted, shielded pair of wires (Belden 8761 or equal). The receiver board is wired to the supply voltage and has all the necessary calibration adjustments; failsafe and time delay adjustments, and the relay output. It is possible to calibrate the LS8000 without climbing a tall tank or a probe can be located up to a mile from the nearest supply voltage.
The remote mounting does not sacrifice the reliability, stability, or performance that makes Babbitt International level switches famous. Every standard unit has an on-board fuse and surge suppressor to protect the circuitry from power surges. Additionally, a static suppression circuit protects against hostile bin environments created by static-prone materials such as plastic pellets.
The built-in timer allows the user to select ON DELAY or OFF DELAY operation if desired. The timing range is adjustable from 1/8 second to 2 hours. The timer can be used to ignore wave action in a turbulent vessel, or the timer can be used to pump down a sump with a single probe.
When the probe is installed, it is calibrated in the absence of material touching the probe. When the desired material comes in contact with the probe, the LS8000 is activated and gives the desired output.
All the necessary calibration indicators are on-board so all you need to calibrate the LS8000 is a small screwdriver. Fail-safe electronics provide peace of mind. The modular electronics make troubleshooting and repair a snap. Babbitt also offers Audible & Visual Alarm Boxes that can be used to accompany any of single-point, dual-point, or multi-point level switches. Alarm boxes provide simple and reliable warnings of high or low-level alarm conditions in tanks, vessels, silos, hoppers, sumps, chutes, and interface applications.
Dimensions:
