Buy B+B SmartWorx PCI-1240U-B2E, 4-Axis Stepping Universal PCI Card

info@PrimeBuy.com

1-855-969-9322
1-908-282-3332 (Intl.)

B+B-SmartWorx, PCI-1240U-B2E, 4-Axis Stepping and Servo Motor Control Universal PCI Card

Features:

Independent 4-axis motion control
Hand wheel and jog function
2/3-axis linear interpolation function
2-axis circular interpolation function
Continuous interpolation function
Programmable T/S-curve acceleration/deceleration rate
Up to 4 MPPS output for each axis
Two pulse output types: CW/CCW or Pulse/Direction
Up to 1 MHz encoder input for each axis
Two encoder pulse input types: A/B phase or Up/Down
Constant speed control
Position management and software limit switch function
BoardID™ switch

Advantech introduces the PCI-1240U 4-axis stepping/pulse-type servo motor control card designed for general-purpose extreme motion applications. The PCI-1240U is a high-speed 4-axis motion control card for the PCI bus that simplifies stepping and pulse-type servo motor control, giving you added performance from your motors. The card's intelligent NOVA ® MCX314-motion ASIC builds in a variety of motion control functions, such as 2/3-axis linear interpolation, 2- axis circular interpolation, T/S-curve acceleration/deceleration rate and more. In addition, the PCI-1240U performs these motion control functions without processor loading during driving.

Report incorrect product information

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Notifications

Notifications This product will be drop-shipped directly from the manufacturer. We will provide you with the manufacturer's lead time once advised.

All sales are final

These are made-to-order items.
This product is not eligible for return or exchange unless defective.
The average lead-time is 1 or 2 weeks.

Return and Warranty

Please note that return requests for B+B SmartWorx items must be submitted within 14 days after the delivery date.

Technical Details

Reviews

Counter/Encoder Input

Counting Range

32-bit

Encoder Type and Interface

Counts per Enc. Cycle

x1, x2, x4 (A/B phase only)

Input Range

0~1 VDC for low; 3.5~5 VDC for high

Input Type

Quadrature (x1, x2, x4 A/B phase) or CW/CCW

Max. Input Frequency

4 MHz under x4 A/B phase mode

Frequency

Signal Input

Logic level 1: 10~30 VDC
Logic level 0: 0~3 VDC

General

Connectors

1 x 100-pin SCSI female connector

Humidity (Operating)

5~95% RH (non-condensing)

Humidity (Storage)

5~95% RH (non-condensing)

Local I/O

General Input Signal

Input voltage:

24 VDC Max.

Input delay:

100 us Max. (isolation delay)

Signal:

EMG (emergency stop)
ORG, LMT+, LMT-
INPOS (in position signal)
LTC (counter latch)
RDY (servo ready)
ALARM (servo alarm)

General Output Signal

Output voltage:

Open collect 24 VDC Max

Output delay:

100 us Max. (isolation delay)

Sink current:

100 mA per channel

Signal:

CMP (position compare in range output)
SVON (servo on)
RALM (reset driver alarm)
ERC (counter clear signal)

Pulse Type Motion Control

Interpolation

2-axis linear, 3-axis linear, 2-axis circular

Max. Output Speed

4 Mbps

Motor Driver Support

Pulse-type servo/stepping

Pulse Output Type

Pulse/direction (1-pulse, 1-direction type) or CW/CCW (2-pulse type)

Step Count Range

±2, 147, 483, 646

Velocity Profiles

T-Curve, S-Curve

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

Counter/Encoder Input

Counting Range

32-bit

Encoder Type and Interface

Counts per Enc. Cycle

x1, x2, x4 (A/B phase only)

Input Range

0~1 VDC for low; 3.5~5 VDC for high

Input Type

Quadrature (x1, x2, x4 A/B phase) or CW/CCW

Max. Input Frequency

4 MHz under x4 A/B phase mode

Frequency

Signal Input

Logic level 1: 10~30 VDC
Logic level 0: 0~3 VDC

General

Connectors

1 x 100-pin SCSI female connector

Humidity (Operating)

5~95% RH (non-condensing)

Humidity (Storage)

5~95% RH (non-condensing)

Local I/O

General Input Signal

Input voltage:

24 VDC Max.

Input delay:

100 us Max. (isolation delay)

Signal:

EMG (emergency stop)
ORG, LMT+, LMT-
INPOS (in position signal)
LTC (counter latch)
RDY (servo ready)
ALARM (servo alarm)

General Output Signal

Output voltage:

Open collect 24 VDC Max

Output delay:

100 us Max. (isolation delay)

Sink current:

100 mA per channel

Signal:

CMP (position compare in range output)
SVON (servo on)
RALM (reset driver alarm)
ERC (counter clear signal)

Pulse Type Motion Control

Interpolation

2-axis linear, 3-axis linear, 2-axis circular

Max. Output Speed

4 Mbps

Motor Driver Support

Pulse-type servo/stepping

Pulse Output Type

Pulse/direction (1-pulse, 1-direction type) or CW/CCW (2-pulse type)

Step Count Range

±2, 147, 483, 646

Velocity Profiles

T-Curve, S-Curve

Return and Warranty

Please note that return requests for B+B SmartWorx items must be submitted within 14 days after the delivery date.

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

B+B SmartWorx PCI-1240U-B2E 4-Axis Stepping Universal PCI Card

Identifiers

Return and Warranty

Technical Details

Return and Warranty

Reviews