ATG LED Lighting PSC-BL-I-FM-110-BLE-SR Bi-Level Passive Infrared

ATG LED Lighting, PSC-BL-I-FM-110-BLE-SR, Bi-Level Passive Infrared (PIR) Occupancy Sensor w/Load Switch w/Bluetooth Mesh in Silvair Enabled Version

Features:

• PIR sensor
• Input voltage: 120-277VAC, 50/60Hz
• 0-10V configurable output: set to 0% (OFF)*, 10%, 25% or 50% dimming
• Photocell for daylight sensing
• Time delay 1 adjustable 5 sec to 30 min
• Time delay 2 adjustable 10 sec to ∞
• LED Motion indicator
• Mounting height up to 40ft.
• 360° coverage pattern
• Bluetooth add-on enables remote sensor programming (up to 40ft) with greater customization of dimming levels, and time delays.

The ATG Wireless Control System PSC-BL-I-FM-110 provided by McWong can accept universal input (120-277 VAC) to use the PIR Motion Detector Architecture and passive infrared (PIR) technology for improved detection coverage for high bay, and low bay applications. The PSC-BL-I-FM-110 is a Class 2 Device designed to satisfy CA Title 24 requirements for bi-level dimming of lighting fixtures. Using a 0-10 V signal, the sensor is capable of dimming lighting loads down to 0%, 10%, 25%, or 50%. The sensor is suitable for a variety of indoor applications. It supports fixture and ceiling mounts up to 40 ft high. Sensor is rated for use in temperatures ranging from -30° to 70°C and relative humidity from 90 to 95% at 30°C. 0-10 V: 100 mA to drive up to 50 LED sink drivers on 0-10 V output.