ATC, 365C-300-T-30-PX, 365C Series Long-Ranger Computing Timer with Adjustable Range 0.01 Sec to 999 Hours, 24 VAC 50-60 Hz Voltage, Display, ON-Delay, Basic Plug-In Unit
Features:
- Industry standard digital timer
- Adjustable range 0.01 Sec. to 999 hours
- High brightness VF display
- High noise immunity
- UL recognized
- 24 VAC 50-60 Hz Voltage
- Display, ON-Delay/Time up or down and stop (reset on power failure)
- Basic Plug-In Unit
The 365C long-ranger computing timer from Automatic Timing and Controls is microprocessor-based digital timer with three rotary knobs for setting and adjustment of the Preset. The Preset can be any three-digit value from .01 Sec to 999 Hrs. The Decimal and Range are switch selectable. The high-intensity blue vacuum fluorescent display is DIP switch selectable to Timeup or Timedown. Two heavy-duty 7A DPDT relays provide instantaneous, interval or delayed output control. Plug-in panel mounting allows easy replacement without the removal of field wiring.
Computation
Through its internal microcomputer, the 365 keeps track of the set point throughout the time cycle. Whenever there is a change in set point, even during a cycle, it instantly re-computes the time remaining and accurately determines time-out. This unique capability is especially valuablein the time-down modes as it allows you to shorten a cycle without loss of accuracy.
Positive Reset Time and Pulse Length
Digitally clocked by the microcomputer, the 365's reset time is consistently of the same duration, regardless of variations in line voltage, power supply, or time cycle. As a result, the 365 is not subject to false reset from momentary power interruptions (less than 30 mSec). When the 365 operates in repeat-cycle mode, the output pulse is also digitally clocked so that both its occurrence and duration are consistent.
Wide Range
365 Long-Ranger covers the overall span of 0.01 Sec to 999 HR, in nine switch-selected ranges of 0 to 9.99, 99.9 or 999 Sec, MIN or HR. The timer can be optimized within any selected range simply by removing appropriate selector knobs (e.g. with the timer in the 9.99 Sec range, youcan obtain a tamper-proof span of 0.99 by setting the left selector at 0 and removing the knob).
Programmable Display
Depending on the position of an internal jumper, the 365's three-digit cycle progress display will time Up to or Down from the set point; after time-out, it will either STOP or GO (i.e. display the time elapsed after time-out).
Noise Immunity
The 365 has formidable defenses against noise: transformer power supply, full-wave bridges, buffered logic. Furthermore its microcomputer detects; and rejects; noise pulses that manage to penetrate its defenses. No industrial timer has ever offered greater noise immunity.
Reliability and Ruggedness
ATC firmly believes that no industrial timer has ever achieved a higher level of reliability and ruggedness. The 365's electronic components have no moving parts and are assembled, virtually without hand wiring, from computer-tested circuit boards. Its few mechanical components have been selected for reliable service; the two load relays havea life expectancy of 100,000,000 operations and heavy-duty contacts rated at7 amps; and the three rotary set point selector switches exhibit extremely low wear.
Compact, Plug-In and Dust-Tight
Packaged in a 72mm² DIN housing, the 365 occupies 40% less panel space than conventional timers. It is a true plugin timer that can be replaced in Seconds without disturbing housing or wiring. The 365 is also fully gasketed and O-ring sealed to be dust tight.
Self Diagnostics
The time will display "FAIL" anytime there is a problem or the knobs are in between digits.
For more information, please see 
Data Sheet
