ATC, 354C-350-Q-30-PX, 354C Series Shawnee II High Speed Counter, 9,999 Counts Range, 120 VAC 50-60 Hz Voltage with Display (ON-Delay), Basic Plug-in Unit
Features:
- 4 Digit Display
- Easy to Set
- Noise Immunity
- Plug-In & Dust-Tight
- Control Versatility
- High Repeat Accuracy
- Range 9,999 Counts
- Voltage 120 VAC 50-60 Hz
The solid-state 354 is manufactured from a series of computer-tested plug-in circuit boards and assembled virtually without hand wiring. Because it has no moving parts in its logic circuits, its life expectancy is practically unlimited. Even the load relay-the 354's only significant mechanical component-has a life expectancy of 100,000,000 operations (no load), while the optional solid-state switch module has a virtually unlimited life expectancy. As a result, the 354 achieves an overall reliability that surpasses even the high level achieved by previous Shawnee counters.
Cycle Progress Indication
The Shawnee 354 indicating counter provides cycle progress indication on a four-digit display located immediately above the digital setting number wheels. While the non-indicating
Easy to Set at All Times
The Shawnee counter is easily and accurately set even with work gloves on. Push any of its four toggle levers in any sequence until the number you want appears above it. You can decrease as well as increase each number by pushing the levers up or down. You can change the setting at any time, even during a cycle.
Noise Immunity
The 354 does not have to be shielded: its transformer power supply, full-wave bridges, buffered logic and other design characteristics render it immune to the electrical noise that is sometimes encountered in industrial environments thus eliminating false starts and reset due to voltage spikes.
Plug-In and Dust-Tight
354 counter feature true plug-in design and are dust-tight from the front of panel.
100% Accurate and Bounce-Proof
The repeat accuracy of the Shawnee 354 is 100% at all rated speeds, even in the presence of contact bounce. The 354 has two selectable levels of bounce suppression:
- a normal level which eliminates false counts at speeds up to 500 per Second with reed switch inputs, and 5,000 per Second with DC voltage pulses
- a high level, for speeds up to 80 per Second with highbounce contact closures (relays, precision switches, etc.).
Housing, it Occupies 40% Less
Packaged in a 72mm DIN size housing, the 354 occupies 40% less panel space than previous IC counters. Modern production and assembly techniques have substantially reduced manufacturing costs resulting in a 45% cost saving.
Control Versatility
The 354 operates either as a repeat cycle pulse generator or in single-cycle interval or delayed mode. You choose the kind of control action you want by installing jumpers on the terminal block. It also provides a choice of control output, a standard plug-in SPDT relay or an optional SPST solid-state switch module...plus an independent and separate DC output signal at Terminal 6.
Operation
The Shawnee 354 operates on a digital logic circuit with three main elements: input circuits which allow it to count various types of DC pulses;a read-only-memory (ROM) whose output is set by the counter's digital setting number wheels; and a comparator that continuously examinesthe outputs of the input circuit and ROM. When the start (ready/reset) signal is on, the input circuit begins to count incoming pulses, feedingthe total count continuously to the comparator. When input circuit output exactly equals ROM output, the 354 counts out. At that instant, the inputcircuit automatically turns itself off even if the start signal remains on; it is therefore not necessary to turn off the pulses externally. At the sameinstant, the 354 provides one of three load control actions depending on how it is wired (see Typical Applications). When the 354 is wiredfor interval operation, the counter's output device (either the standard SPDT relay or the optional SPST switch module) is energized from thestart to the end of the count cycle so is the DC output at terminal 6.
For more information, please see 
Data Sheet
