| Voltage Gain | Selectable at 26dB, 32dB, 38dB, or 1.4V |
| Damping Factor | >250 (8 Ohms load <1kHz) |
| Input High Pass Filter | 80Hz 2nd order |
| Distortion (SMPTE, typical) | <0.5% |
| Distortion (THD-N, typical) | <0.5% (8 Ohms, 10dB below rated power, 20Hz-20kHz) |
| Channel Separation | -75dB (dB from full output, 1kHz) |
| Signal to Noise (20Hz-20kHz, unweighted) | >108dB |
| Frequency Response | 20Hz-20kHz, +/-0.05dB |
| Balanced Input Connector | Euroblock 3.5mm, 1/4" TRS and XLR Combo jack |
| Input Impedance | 10k Ohms |
| Maximum Input Level | +21dBu |
| Speaker Output Connector | Neutrik speakON |
| Control Network | Compatible w/ standard 100MB Ethernet |
| AUX Output Connector | Balanced Euroblock 3.5mm |
| AUX Output Maximum Level | +21dBu |
| Remote Standby Contact Closure | Euroblock 3.5mm, close contact to GND for standby mode |
| Preset Recall Contact Closure | Euroblock 3.5mm, close contact to GND for preset 1-4 recall |
| Data Connection | Euroblock 3.5mm - Gnd, +18V, In, Out |
| Fault Condition Logic Outputs | Fault indicated by loss of 1Hz "heartbeat" pulse signal |
| Remote DC Level Control | Euroblock 3.5mm - Gnd, CV, V+ per input |
| Attenuators (per channel) | Front panel, software, offset link group, and remote. Fully off = Mute |
| Amplifier Protection | - Inrush current limitation
- temperature monitoring
- output over-power protection
- mains fuses
|
| Cooling | Continuously variable temperature controlled axial fan(s) |
| Environmental | 32-113 deg F, (0-45 deg, C) (noncondensing) |
| Nominal (Automatic Sensing SMPS) | 110 - 120VAC/220 - 240VAC |
| Operating Range | 70 - 135VAC/140 - 270VAC |
| Minimum power-up | 85VAC/170VAC |
| Power Cable Connector | 20A powerCON (32A powerCON 3.04 model only) |
| Unit Weight | 25.9lbs (11.4kg) |
| Unit Dimensions | 19"W x 3.5"H x 16.84"D (483mm x 89mm x 428mm) |
