Apogee, FX_BUNDLE_RETAIL_V2, Complete FX Plug-In Bundle, Version 1, Download
The Apogee Complete FX Plug-In Bundle brings Mac users on native AU, VST, or AAX platforms all five of Apogee's powerful sound sculpting tools at a substantial savings over purchasing each individually. An Apogee interface is not required, but Ensemble and Element users can run the plug-ins on Apogee's FX Rack system for additional benefits.
Apogee Electronics EQP-1A - FX Rack Pultec Program Equalizer Plug-In (Version 1, Download)
Version 1 of the Apogee Electronics EQP-1A is an FX Rack Pultec program equalizer plug-in merging the sound of the legendary EQP-1A hardware equalizer with multiple powering, routing, and monitoring modes. It can be powered by computer's CPU without Apogee hardware, making it ideal for producers, beatmakers, and audio engineers with mobile rigs or studio-based systems. When used with qualified Apogee hardware, it allows real-time printing through the Apogee Control Software, or low-latency monitoring while linked to a mirrored instance in DAW.
Licensed and endorsed by Pulse Techniques, this plug-in was thoroughly modeled from a Pulse Pultec EQP-1A hardware unit to provide its renowned EQ curves and nonlinearities. Each of the two bands features frequency selection and separate controls for boost and attenuation. View and manage gain staging via large I/O meters and dedicated input and output faders. The EQP-1A supports AAX, Audio Units, VST, and VST2 plug-in formats on macOS-equipped computers.
- Precisely recreates the unique characteristics of the Pultec EQP-1A
- Broad EQ curves allow gentle and powerful tone shaping
- Interaction of EQ bands creates curves used by engineers for decades
- Recreates circuit nonlinearities of the analog EQP-1A
- Officially licensed and endorsed by Pulse Techniques, the manufacturer of the Pultec EQP-1A used to model the Apogee plug-in
- Runs on native CPU power or via Apogee hardware DSP in Element and Ensemble Thunderbolt audio interfaces
- Two bands of EQ with separate per-band boost and attenuation knobs
- Sharp to broad bandwidth control
- Low-frequency selector at 20/30/60/100 Hz
- High-frequency selector at 3/4/5/8/10/12/16 kHz
- High-frequency attenuation selector at 5/10/20 kHz
- Large input and output meters
- Dedicated input and output faders
Apogee Electronics MEQ-5 Pultec Mid-Range Equalizer Plug-In (Version 1, Download)
Version 1 of the Apogee Electronics MEQ-5 is an FX Rack Pultec program equalizer plug-in merging the sound of the legendary MEQ-5 hardware equalizer with multiple powering, routing, and monitoring modes. It can be powered by computer's CPU without Apogee hardware, making it ideal for producers, beatmakers, and audio engineers with mobile rigs or studio-based systems. When used with qualified Apogee hardware, it allows real-time printing through the Apogee Control Software, or low-latency monitoring while linked to a mirrored instance in DAW.
Licensed and endorsed by Pulse Techniques, this plug-in was thoroughly modeled from a Pulse Pultec MEQ-5 hardware unit to provide its renowned EQ curves and nonlinearities.Two bands feature frequency selection with boost control while the third is for attenuation. View and manage gain staging via large I/O meters and dedicated input and output faders. The MEQ-5 supports AAX, Audio Units, VST, and VST2 plug-in formats on macOS-equipped computers.
- Precisely recreates the unique characteristics of the Pultec MEQ-5
- Sculpts midrange frequencies with precision and warmth
- Interaction of EQ bands creates curves used by engineers for decades
- Officially licensed and endorsed by Pulse Techniques, the manufacturer of the Pultec MEQ-5 used to model the Apogee plug-in
- Runs on native CPU power or via Apogee hardware DSP in Element and Ensemble Thunderbolt audio interfaces
- Two bands of EQ boost with in lower-mid and upper-mid frequency ranges
- Low-mid frequency boost selector at 200/300/500/700/1000 Hz
- High-mid frequency boost selector at 1.5/2/3/4/5 kHz
- Single band of midrange frequency attenuation
- Mid-frequency attenuation selector at 200/300/500/700/1500/2000/3000/4000/5000/7000 Hz
Apogee Electronics ModEQ 6 - FX Rack 6-Band Visual Equalizer Plug-In (Version 1, Download)
Version 1 of the Apogee Electronics ModEQ 6 is an FX Rack 6-band parametric equalizer plug-in merging flexible controls with a simple visual user interface and multiple powering, routing, and monitoring modes. It can be powered by computer's CPU without Apogee hardware, making it ideal for producers, beatmakers, and audio engineers with mobile rigs or studio-based systems. When used with qualified Apogee hardware, it allows real-time printing through the Apogee Control Software, or low-latency monitoring while linked to a mirrored instance in DAW.
With high- and low-pass filters, two peak/shelf bands, and two peak/notch bands, the ModEQ 6 offers versatility suitable for individual instruments, stems, and mixes. Each band features continuously adjustable frequency and bandwidth, which can set to proportional or constant Q mode. The customizable real-time spectrum analyzer and per-band solo functionality serve as powerful tools for determining tonal problems. View and manage gain staging via large I/O meters and dedicated input and output faders. The ModEQ 6 supports AAX, Audio Units, VST, and VST2 plug-in formats on macOS-equipped computers.
- Parametric equalizer with simple visual user interface
- Six configurable bands-two peak/shelf bands, two peak/notch bands, and high- and low-pass filters
- Spectrum analyzer shows frequency content in real time
- Per-band solo functionality
- Selectable proportional or constant-Q mode
- Runs on native CPU power or via Apogee hardware DSP in Element and Ensemble Thunderbolt audio interfaces
- Continuously adjustable frequency and bandwidth
- Variable slope on filters
- Variable gain on peak/shelf/notch bands
- Color-coded bands for easy identification
- Large input and output meters
- Dedicated input and output faders
Apogee Electronics ModComp - FX Rack Visual Compressor Plug-In (Version 1, Download)
Version 1 of the Apogee Electronics ModComp is an FX Rack compressor/limiter plug-in merging traditional compressor controls with a large visual user interface and multiple powering, routing, and monitoring modes. It can be powered by computer's CPU without Apogee hardware, making it ideal for producers, beatmakers, and audio engineers with mobile rigs or studio-based systems. When used with qualified Apogee hardware, it allows real-time printing through the Apogee Control Software, or low-latency monitoring while linked to a mirrored instance in DAW.
With three selectable styles, a variety of ratios, and adjustable knee, threshold, attack, and release settings, the ModComp offers versatility suitable for individual instruments, stems, and mixes. Utilize the dry/FX slider for simple parallel processing, and apply make-up gain automatically or manually. A 2-band sidechain EQ enables tonal optimization of trigger input signal. View and manage gain staging via large I/O meters and dedicated input and output faders. The ModComp supports AAX, Audio Units, VST, and VST2 plug-in formats on macOS-equipped computers.
- Compressor/limiter with large visual user interface
- Three user-selectable styles-punch, easy, and level
- 2-band sidechain EQ
- Automatic or manual make-up gain
- Dry/FX mix for simple parallel processing
- Runs on native CPU power or via Apogee hardware DSP in Element and Ensemble Thunderbolt audio interfaces
- Adjustable threshold and knee
- Selectable ratio from 1:1 to 30:1
- Adjustable attack time from 0.1 to 107 ms
- Adjustable release time from 22 to 1100 ms
- Large input and output meters
- Dedicated input and output faders
Apogee Electronics Opto-3A - FX Rack Vintage Compressor Plug-In (Version 1, Download)
Version 1 of the Apogee Electronics Opto-3A is an FX Rack vintage-style compressor/limiter plug-in merging optical compression performance with straightforward controls and multiple powering, routing, and monitoring modes. It can be powered by computer's CPU without Apogee hardware or via the DSP in Apogee Element or Ensemble Thunderbolt audio interfaces, making it ideal for producers, beatmakers, and audio engineers with mobile rigs or studio-based systems. When used with qualified Apogee hardware, it allows real-time printing through the Apogee Control Software, or low-latency monitoring while linked to a mirrored instance in DAW.
With adjustable gain, peak reduction, and high-frequency emphasis, the Opto-3A offers versatility suitable for individual instruments, submixes, and stems. Utilize the dry/FX slider for simple parallel processing, and tweak the sidechain high-pass filter to prevent pronounced low frequencies from causing over-compression. View and manage gain staging via large I/O meters, an assignable VU meter, and dedicated input and output faders. The Opto-3A supports AAX, Audio Units, VST, and VST2 plug-in formats on macOS-equipped computers.
- Optical compressor/limiter with vintage-style controls and tone
- Reproduces the reactive compression characteristics of modeled hardware
- Adjustable high-frequency emphasis via HF Contour control
- Sidechain high-pass filter
- Sidechain listen function
- Adjustable gain and peak reduction
- Dry/FX mix for simple parallel processing
- Runs on native CPU power or via Apogee hardware DSP in Element and Ensemble Thunderbolt audio interfaces
- Selectable comp/limit mode
- Assignable VU meter and peak LED can display output or gain reduction
- Large input and output meters
- Dedicated input and output faders
