AMX FG1010-512-01 DX-RX-4K60 DXLink 4K60 HDMI Receiver Module

FG1010-512-01 Includes Only:

• 1 x DX-RX-4K60 Receiver
• 1 x DC 12V Power Cord
• 1 x AC Power Cable with US Pins
• 1 x AC Power Cable with CN Pins
• 1 x AC Power Cable with EU Pins
• 1 x AC Power Cable with UK Pins
• 1 x Broadband IR Receiver (30KHz-50KHz)
• 1 x IR Emitter
• 1 x Phoenix Connector Plug (3.5mm, 3 Pins)
• 1 x Phoenix Connector Plug (3.5mm, 2 Pins)
• 2 x Mounting Bracket (with Screws)
• 4 x Rubber foot

Features:

• Supports 4K at 60Hz 4:4:4 8bit and HDCP 2.2
• SmartScale® on the Receivers works to automatically recognize any device's supported resolutions and signal type parameters, allowing updating source and destination devices without manual setup. Also included is the ability to control detailed timing parameters for customized video output formats. (SmartScale is the ability to configure the scaling output by automatically selecting destination defined resolutions.)
• Supports USB1.1 and USB2.0 Host or device connections set by the Mode switch on the front panel, and supports hosts like a Desktop or Laptop and USB devices like keyboards, mice, and cameras
• Standard twisted pair cable saves time and installation effort
• Transports video signals over distances up to 100m/330ft via DXLINK ports via Cat 6/6a/7 cable
• Supports CEC control and pass through; Hardware Reference Manual 4
• The 232 port (RS-232 serial) supports bidirectional transfer of serial data between Central Controller and TX/RX (Endpoint Mode)
• The IR port supports bidirectional transfer of IR data between Central Controller and RX (Endpoint Mode)
• The DX-TX-4K60 transmitter supports HDMI loop out for connecting a local display
• Embedded Audio in in Transmitter and de-embedded Audio out in Receiver
• Power over DXLink (twisted pair cable) support when used with a switcher or with an approved AMX Power over DXLink device
• DXLink modules are compatible with all V Style versatile mounting options including rack, surface, and pole

The DX-RX-4K60 is an HDMI receiver with 4K at 60Hz 4:4:4 and HDCP 2.2 compatibly. It receives an HDMI signal with embedded audio over twisted pair cable from an Enova DGX Digital Media Switcher, an applicable Enova DVX Solution, or directly from a DX-TX-4K60. The RS-232 port on a DX-T=RX-4K60 supports bidirectional serial data via the twisted pair cable to/from the RS-232 port on a DX-TX-4K60. The IR TX and IR RX ports on a DX-RX-4K60 each support unidirectional IR data via the twisted pair cable to/from the IR RX and IR TX ports on a DX-TX-4K60. The USB Host and Device ports on a DX-RX-4K60 each support transmitting USB data via the twisted pair cable to/from the USB Device and Host ports on a DX-TX-4K60. The DX-RX-4K60 features SmartScale® Technology (integrated EDID output scaling) to ensure an appropriate output resolution, plus it supports a Manual (override) option for setting up custom resolutions and a Bypass option. It can be controlled through sending ICSP commands from a NetLinx Central Controller and also supports CEC control and pass through to control 3rd-Party devices.These DXLink products support several different modes which are available for system setup and use. For a brief explanations of the modes please refer to the "Quick Reference Table".

For more information, please see Data Sheet and Quick Start Guide