AMX, FG1010-365-02, DXFP-TX-4K60-TAA DXLink 4K60 HDMI Fiber Transmitter Module
FG1010-365-02 Includes Only:
- 1 x DXFP-TX-4K60 Transmitter
- 1 x Optical Module (10Gbps SFP +, 850nm, 300nm Multimode Fiber Transceiver Module)
- 1 x 12V Power Cord
- 1 x AC Power Cable with US Pins
- 1 x AC Power Cable with CN Pins
- 1 x AC Power Cable with EU Pins
- 1 x AC Power Cable with UK Pins
- 1 x Broadband IR Receiver (30KHz-50KHz)
- 1 x IR Emitter
- 1 x Phoenix Connector (3.5mm, 3 Pins)
- 1 x Phoenix Connector (3.5mm, 2 Pins)
- 2 x Mounting Bracket (with Screws)
Features:
- Supports 4K at 60Hz 4:4:4 8bit and HDCP 2.2
- SmartScale® on the Receivers works to automatically recognize any device's supported resolutions and signal type parameters, allowing switching out source and destination devices without manual setup. Also included is the ability to control detailed timing parameters for customized video output formats. (SmartScale is the ability to configure the scaling output by automatically selecting destination defined resolutions.)
- Supports USB1.1 and USB2.0 Host or device connections set by the Mode switch on the front panel, and supports hosts like a Desktop or Laptop and USB devices like keyboards, mice, and cameras
- Field Serviceable Fiber Modules; a. Easily remove and replace SFP modules in the field; b. Support Multimode (MMF) Fiber.
- Transports video signals over distances up to 300m/984ft via DXLINK ports via OM3 cable and 550m/1804ft via OM4 cable; Hardware Reference Manual 5
- Supports CEC control and pass through
- The 232 port (RS-232 serial) supports bidirectional transfer of serial data between Central Controller and TX/RX (Endpoint Mode)
- The IR port supports bidirectional transfer of IR data between Central Controller and RX (Endpoint Mode)
- The DXFP-TX-4K60 transmitter supports HDMI loop out for connecting a local display
- Embedded Audio in in Transmitter and de-embedded Audio out in Receiver
- DXLink modules are compatible with all V Style versatile mounting options including rack, surface, and pole
The DXLink 4K60 HDMI Fiber Transmitter is HDMI 2.0 and HDCP 2.2 compliant. It supports 4K60 4:4:4 video and High Dynamic Range (HDR) for pixel-for-pixel image reproduction without chroma subsampling. It transmits audio, video, control, USB 2.0, and Ethernet over duplex fiber to a DXLink Fiber receiver, up to 550 meters away. This module includes a Multi-Mode Duplex (MMD) SFP+ module, which can be replaced with a Single-Mode Duplex (SMD) SFP+ module if needed.
Common Applications
Fiber uses light to distribute data rather than electric signals making it both the highest quality and most secure way to transport video as it is not susceptible to electronic noise or non-intrusive physical wiretapping. This module is compatible with DGX DXLink 4K60 Fiber input cards and DXLink 4K60 Fiber receivers. It is ideal for applications where the demands of high-resolution video clarity, long distance transmission, and maximum security need to be met without compromise, including campus-wide distribution of sources that are shared between classrooms, secure military applications, casinos, arenas, and museums.
For more information, please see 
Data Sheet and User Manual
