| General |
| Dimensions | - 3.55 in (9.02 cm) depth
- 9.6 in (24.5 cm) width
- 1 in (2.5 cm) height
|
| Weight | Approx. 1.45 lbs. (.66 kg) |
| Mounting Options | Includes V-Style surface mount brackets |
| AMX Products Compatible with DXLink RX: | Incite, DXLite RX, DVX |
| Airflow | Convection (openings on top, sides and bottom of case) |
| Approvals: Regulatory Compliance | CE, FCC, NRTL, RoHS, WEEE |
| Twisted Pair Cable Type | Shielded Cat6, Cat6A and Cat7 / Shielded Cat6A and Cat7 |
| Twisted Pair Cable Length | Up to 328 ft. (100 m) |
| HDBaseT |
| HDBaseT Layer Throughput (Max) | 10.2 Gbps |
| Important Notice | DXLink/DXLite twisted pair cable runs forDXLink/DXLite equipmentshall only be run within acommon building. |
| Active Power Requirements |
| AC Power: Power Consumption, Local 12V | 12 VDC 2A Max Output; 100-240V 50/60Hz AC Input |
| Supplied (Max) | 6.3 w |
| Power Connector | Screw Down Locking Power Connector |
| HDBaseT Power | Power Supplied From a HDBaseT Receiving Device If Available |
| Environmental |
| Temperature (Operating) | 32° F to 122° F (0° C to 50° C) |
| Temperature (Storage) | 14° to 140° F (-10° to 60° C) |
| Humidity (Operating) | 10% to 90% RH (non-condensing) |
| Humidity (Storage) | 10% to 90% RH (non-condensing) |
| Thermal Dissipation, Local 12V Supplied (max): | 21 BTU/hr |
| Back Connectors |
| Local Power | Screw Down Locking Power Connector |
| HDBaseT Output Serial | RJ-45 |
| Serial | 3 Position 3.5mm Pluggable Phoenix Terminal |
| HDMI Input | HDMI Type A Port |
| USB 2.0 HDBaseT Pass-through | (4) USB Type A Connectorsfor USB Peripheral Devices (1) USB 2.0 Type B Connector For Host Device EitherHost or Peripheral Devices Active Based on Front USB Switch Selection |
| HDMI |
| Compatible Formats | HDMI , HDCP, DVI (DVI requires conversion cable) |
| Signal Type Support | HDMI, DVI-D (Single Link with a DVI-HDMI Cable Adapter) DisplayPort++ (input only with HDMI cable adapter |
| Input Signal Type | HDMI, HDCP DVI |
| Data Rate (Max) | 18 Gbp |
| Pixel Clock (Max) | Up to 600 MHz |
| Progressive Resolution Support | 480p up to 4096 x 2160 at 60 Hz |
| HDR Support | HDR 10 Dolby Vision (with data rate under 10.2 Gbps) |
| Color Space Support | RGB 4:4:4 , YCbCr 4:4:4, 4:2:2, and 4:2:0 |
| HDBaseT 4K Format Support | - 3840x2160p at 24/25/30/60 Hz, 4:4:4
- 4096x2160p at 24/25/30
- 3840x2160p at 50/60 Hz, 4:2:0
- 4096x2160p at 50/60 Hz, 4:2:0
|
| Audio Format Support | Dolby TrueHD, Dolby Digital, DTS-HD MA, DTS, 2 CH LPCM, 6 CH L-PCM, 8 CH L-PCM Dolby Digital and DTS support up to 48kHz, 5.1 channel |
| HDCP Support | Yes HDCP 1.4, 2.2 |
| Signal Transport - HDBaseT |
| Connector | (1) RJ-45 |
| Supported Signal Styles | Digital video, audio, bidirectional control, USB 2.0 and power |
| Transport Layer Throughput (Max) | 10.2 Gbps |
| Input Formats | Supports 4K60 4:4:4 HDMI 2.0, HDCP 2.2., embedded audio, power, bi-directional control and USB 2.0 passthrough |
| Twisted Pair Cable Type | Shielded Cat6, Cat6A and Cat7 HDBaseT cable runs for equipment shall only be run within a common building where common building is defined as: The walls of the structure(s) are physically connected and the structure(s) share a single groundreference |
