Altronix MAXIMAL77D Maximal Access Power Controller 115VAC

MAXIMAL77D Includes Only:

• 1x Enclosure, 26"H x 19"W x 6.25"D, Grey, 19 Gauge, Indoor
• 2x Access Power Controller, 8 PTC Class 2 Relay Outputs, FAI, Board
• 2x Power Supply Charger, Single Fused Output, 24VDC at 10A, 115VAC, Board

Features:

• Sixteen (16) independently controlled Fail-Safe and/or
• Fail-Secure power outputs.
• Sixteen (16) auxiliary power outputs (unswitched).
• Output PTCs are rated at 2.5A.
• Filtered and electronically regulated outputs.
• Supervision: AC Fail. Battery Fail and Battery Presence.
• Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the sixteen (16) outputs.
• Alarm output relay indicates that FACP input is triggered.
• Fire Alarm disconnect input options: a) Normally open (NO) or normally closed (NC) dry contact input b) Polarity reversal input from FACP signaling circuit.
• Built-in charger for sealed lead acid or gel type batteries.
• Instantaneous transfer to stand-by batteries.
• UL Listed in the U.S. and Canada

Maximal77D distributes and switches power to access control systems and accessories. Unit converts a 115VAC 60Hz input into sixteen (16) independently controlled 24VDC Class 2 Rated PTC protected power-limited outputs. The outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Keypad, Push Button, REX PIR, etc. Units will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the sixteen (16) outputs.