Features:
- With Ps-125 Power Supply
- Used With Mls-spu1 Interface Unit
AlphaPage™ alphanumeric pocket paging systems from Alpha Communications® use the TX200-ENC paging transmitter. The TX200-ENC transmits a UHF (450-470 MHz, programmable, synthesized frequency) paging signal in the POCSAG format. POCSAG baud rates are 512/1200/2400. RF power output is programmable to 2W or 5W. Paging range depends on building construction. Range can exceed two (2) miles (line of site). The transmitter contains a carrier detection receiver. Multiple transmitters on the same frequency can be used on a site. Each transmitter will wait until the frequency/channel is clear before transmitting. No pager database programming of the TX200-ENC is required. The MLS processor boards and/or PC software attached to the TX200-ENC provide all programming. A unity gain flexible antenna with BNC connector is included that connects directly to the transmitter. The front panel contains four (4) LED indicators (for power, data transmit, RSSI, and Link). A regulated DC power supply is also included.
When used with the AlphaPage™ alphanumeric pocket paging system, AlphaEcall™ 100 series, or AlphaLINQ™ 100 series each TX200-ENC also requires the following components; 2- MLS-485 Network Controllers, 1- PTIP-MOD-3 Adapter, 1- DB9-MOD6-1 Adapter and 1- MLS-MOD6-3 Modular cable.
When used with the AlphaEcall™ 200 series or the AlphaEntry™ series systems, each TX200-ENC also requires 1- CA-USBSERV10 serial to USB cable.
