AIDA Imaging, IPCOMM-POE, Portable Wireless Video and Control Transmitter with PoE+ Injection / NPF Battery Support
IPCOMM-POE Includes Only:
- Power Adapter and Cable
- Portable Wireless Video and Control Transmitter
Features:
- Give any IP based camera wireless functionality to submit video or control over most WiFi based routers/networks.
- PoE+ injector to power any IP camera connected to (if supported)
- Capability of using DC12V power tap, or a NPF battery series to power the camera without use of DC12V port.
- Bottom of the IPCOMM-PoE has 3-1/4-20" mounting holes for perfect fitment
- Provides a wireless solution to hard-to-reach or unmountable camera setups in any workflow.
- Can be paired with multiple IPCOMM-PoE's for multi-cam workflows.
- Performance based off of overall bitrate, not resolution. Keep in mind of these rules:
- Limit the amount of obstacles between the router and IPCOMM-POE
- Ensure the signal strength seen when setting the IPCOMM-POE up is above 60%
- Ensure the bandwidth sent by the camera to the router is within 2Kbps~50kbps, this mostly depends on your signal strength. Anything higher will cause delay and video rupturing.
- To avoid power loss, plug in DC12V to keep IPCOMM-PoE running, anda swap batteries if needed.
Lets face it. Wireless transmission has never been the solution to live streaming. That was until the IPCOMM-POE came along. With the power to inject PoE+ power into any camera via DC12V or a NPF-Battery (not included), you can easily take your video creations wirelessly onto any Wi-Fi router, sending IP video or IP control flawlessly as far as your router can reach! This solution brings a whole level of broadcasting opportunity for on-the-go, non-mounting solutions! So bring on this revolution, and start streaming wireless today!
*NDI® is a registered trademark of NewTek, Inc.
