AES Global EL00C-RAD Commercial E-loop Presence Mode, 433.39 MHz

Features:

• Lower power consumption 3-axis magnetometer for vehicle detection:
  • 8 Hz sampling rate
  • Auto-calibration
  • Exit/Entry detection mode
• Fast and simple installation:
  • Quick non-permanent installation
• Up to 6 year battery life:
  • Compact design
  • Compatible with various gates
• Reliable radio communications with transceiver:
  • Reliable radio communication
  • High security 128-Bit AES Encryption

The Commercial Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles. These detections are transmitted to a nearby transceiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode. The sensors are installed on the surface of entry or exit passages using concrete fixing bolts, contain four replaceable Lithium batteries, and can withstand almost any vehicle. The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilises two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched and confirmation will be sent back to the eloop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure A safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, confirmation mode.