Advanced Systems & Designs, 600-22-RADWAGPS-MTI, Digimatic FlashCable for RADWAG PS Series Balance
Features:
- Digimatic output FlashCable for RADWAG PS Series Electronic Balance
- Sends data to GageMux gage interface or devices that recognize the Digimatic Signal
- Several options to trigger data
Send data to GageMux gage interface or other Digimatic input devices.Advanced Systems and Designs can create a Digimatic output interface cable for all RADWAG balances and scales! This FlashCable gage interface is engineered to convert the output on the RADWAG PS Series Electronic Balance to a Digimatic format. The 9-pin female connector on this Advanced Systems & Designs FlashCable connects directly to the male connector on the RADWAG PS Series Electronic Balance.
This FlashCable gage interface is designed to work with GageMux gage interface or other similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable does not obtain any power from the RADWAG PS Series Electronic Balance. When properly connected to GageMux interface, pin 9 of the 10-pin input port provides the power to the FlashCable gage interface. On devices other than the GageMux, pin 9 of the input port connector must provide a 5vDC power to the FlashCable.
When the FlashCable gage interface is powered by the GageMux the LED on the FlashCable turns solid GREEN. The LED briefly flashes RED when the data is being sent or a data request is triggered.
The data transfer can be triggered using any of the following methods:
- Using the PRINT / ENTER button on the RADWAG PS Series Electronic Balance
- Using a Footswitch connected to GageMux USB or equivalent triggering methods
- Using 300-1S in-line handswitch
- Using a Footswitch on the FlashCable (not included)
- Sending a read command from the external computer to the RADWAG PS Series Electronic Balance
A detailed operation manual is included with this FlashCable gage interface. As a default setting, Advanced Systems & Designs sets the FlashCable gage interface to the default RS232 communication settings on the PS Series Electronic Balance. The RADWAG PS Series Electronic Balance and FlashCable gage interface must be set to the same communication values. Refer to the RADWAG PS Series Electronic Balance user manual for more information on external communication and connecting to a peripheral device. Six foot standard cable length.
