Advanced Systems & Designs, 600-22-PrecisaXB-MTI, FlashCable Digimatic Interface for Precisa XB Series Balance
Features:
- Digimatic output FlashCable for Precisa XB Series Balance
- Sends data to GageMux or devices that recognize the Digimatic output signal
- Several options to trigger data
Sends data to GageMux gage interface.Using a RJ-45 Ethernet type male cable connector, this Advanced Systems and Designs - ASDQMS FlashCable gage interface changes the output on the Precisa XB Series Balance to an output in a Mitutoyo Digimatic format. This interface cable is engineered to work with GageMux gage interface or data acquisition systems that recognize the Mitutoyo Digimatic signal.
The FlashCable gage interface does not obtain any power from the gage. When connected to the GageMux, pin 9 of the 10-pin input port provides the power to the FlashCable gage interface. If using devices other than the GageMux multiple input gage interface, make sure pin 9 on the connector provides a 5vDC power supply to the FlashCable gage interface cable.
The LED on the FlashCable gage interface is solid GREEN when power is properly provided to the interface cable. The LED briefly flashes RED when data is send from the Precisa XB Series Balance to the GageMux gage interface.
The data transfer can be triggered using any of the following methods:
- Using the PRINT button on the Precisa XB Series Balance
- Using the Footswitch on the GageMux USB or equivalent triggering method
- Using 300-1S in-line handswitch
- Using a Footswitch on the FlashCable gage interface (not included)
- Sending a gage read command from a host computer to the Precisa XB Series Balance
A user operation manual is included with this ASDQMS FlashCable gage interface. Advanced Systems & Designs normally sets the FlashCable gage interface at the factory to the default settings on the Precisa XB Series Balance. Both the Precisa XB Series Balance and FlashCable gage interface must be set to the same values in order for proper communication to occur. Refer to the Precisa XB Series Balance operating instructions for more information on external communication with peripheral devices.Six foot standard cable length.
