Advanced Systems & Designs, 600-22-Olympus25MultiPlus-MTI, FlashCable Digimatic Output Cable for Olympus 25 Multi-Plus Thickness Gage
Features:
- Digimatic output FlashCable for Olympus Panametrics 25 Multi-Plus Thickness Gage
- Sends data to GageMux or data collection devices that recognize Digimatic signal
- Several options to trigger data
Used to send data to GageMux multi-input gage interface.The Olympus Panametrics 25 Multi-Plus Thickness Gage is an ultrasonic gage that makes thickness and material velocity measurements on materials that are difficult to measure. This Advanced Systems and Designs FlashCable gage interface changes the output on the Olympus Panametrics 25 Multi-Plus Thickness Gage to an 10-pin output in Mitutoyo Digimatic format.
With a high-quality 6-pin connector this FlashCable gage interface works with GageMux multi-input gage interface or data acquisition systems that recognize the Mitutoyo Digimatic signal. This FlashCable gage interface does not obtain any power from the gage.
When connected to the GageMux gage interface, pin 9 of the 10-pin input port provides the power to the FlashCable. On devices other than the GageMux multiple input gage interface, make sure pin on the Digimatic connector provides a 5v DC supply to the FlashCable gage interface. When properly connected, the LED on the FlashCable gage interface will turn green. During the transmission of data from the Olympus 25 Multi-Plus Thickness gage, the LED will flash red.
Data transfer can be triggered using any of the following methods:
- Using the data send button on the gage, if it has one
- Using 300-1S in-line handswitch
- Using the Footswitch on the GageMux or comparable triggering method
- Sending a gage read command from the computer to the GageMux gage interface
A detailed operation manual is included with this FlashCable gage interface. Advanced Systems & Designs normally sets the FlashCable gage interface to the default settings on the Olympus 25 Multi-Plus Thickness gage. Make sure both the Olympus Thickness Gage and FlashCable are set to the same values. Refer to the Olympus 25 Multi-Plus thickness gage user manual for more information on serial communication.Six foot standard cable length.
