Advanced Systems & Designs, 600-22-OhausPR-MTI, Digimatic FlashCable for Ohaus PR Series Precision Balance
Features:
- ASDQMS Digimatic output FlashCable for Ohaus PR Series Precision Balance
- Sends data to GageMux or devices that recognize the Digimatic Signal
- Several options to trigger data
Send data to GageMux gage interface or other Digimatic input devices.This ASDQMS FlashCable gage interface is a engineered to change the output on the Ohaus PR Series Precision Balance to an output in a Digimatic format. The 9-pin male connector on the Advanced Systems & Designs FlashCable connects directly to the 9-Pin female connector on the Ohaus Precision Balance.
Designed to work with GageMux gage interface or other similar devices that recognize the Mitutoyo Digimatic signal. The ASDQMS FlashCable does not obtain any power from the Ohaus Balance. When connected to the GageMux, pin 9 of the 10-pin input port provides the power to the FlashCable gage interface. If using devices, other than the GageMux, make sure pin 9 of the 10-pin connector provides a 5VDC supply to the FlashCable. When the FlashCable is connected to the GageMux, the LED on the FlashCable turns GREEN. This indicates that the FlashCable is connected properly. The LED turns RED when the data is being sent or a data request is triggered.
The data transfer can be triggered using any of the following methods:
- Using the print / data send button on the Ohaus PR Series Precision Balance
- Using 300-1S in-line handswitch
- Using a Footswitch on the FlashCable (not included)
- Using the Footswitch on the ASDQMS GageMux USB (or equivalent triggering method on similar devices)
- Sending a gage read command from the computer to the Ohaus Precision Balance
A detailed operation manual is included with this ASDQMS FlashCable gage interface. Advanced Systems & Designs normally sets the FlashCable to the default settings on the Ohaus PR Series Balance. Make sure both the Ohaus Precision Balance and FlashCable gage interface are set to the same values. Refer to the Ohaus PR Series Precision Balance instruction manual for more information on external communication. Six foot standard cable length.