Advanced Systems & Designs, 600-22-MRCBPS-MTI, FlashCable Gage Interface for MRC BPS Series Precision Balance
Features:
- Digimatic output FlashCable interface cable or the MRC BPS Series Precision Balance
- Sends data to GageMux gage interface or similar devices that recognize the Digimatic signal
- Several options to trigger data
Send Data to GageMux Gage Interface.The Advanced Systems and Designs FlashCable gage interface is engineered to convert the output on the MRC BPS Series Laboratory Precision Balance to an 10-pin output with Mitutoyo Digimatic format. Using a 9-pin female connector, this FlashCable gage interface is designed to work with GageMux gage interface or other SPC data acquisition systems that recognize the Mitutoyo Digimatic signal.
The FlashCable gage interface does not obtain any power from the MRC BPS Series Laboratory Precision Balance. When using the GageMux gage interface, pin 9 of the 10-pin connector port provides the power to the FlashCable gage interface. If using Digimatic devices other than GageMux gage interface, make sure pin 9 on the connector port provides a 5vDC power supply to the FlashCable gage interface.
Data transfer can be triggered using any of the following methods:
- Using the Enter / Print button on the MRC BPS Series Laboratory Precision Balance
- Using a Footswitch with the GageMux gage interface or equivalent triggering method
- Using 300-1S in-line handswitch
- Sending a read command from the computer to the GageMux gage interface
A detailed operation manual is included with this FlashCable gage interface. Advanced Systems & Designs normally sets the FlashCable gage interface at the factory to the default settings on the MRC BPS Series Precision Balance. The BPS Series Precision Balance and FlashCable gage interface must be set to the same communication values. Refer to the MRC BPS Series Precision Balance instruction manual for more information on properly setting up external communication. Six foot standard cable length.
