Advanced Systems & Designs, ,600-22-MettlerMS-MTI, Mettler Toledo MS Precision Balance Digimatic Output FlashCable
Features:
- Digimatic output FlashCable for Mettler Toledo M-S / MS-L New Classic Precision Balance
- Sends data to GageMux or devices that recognize the Digimatic Signal
- Provides several options to trigger data
Send data to GageMux gage interface or other Digimatic input devices.This FlashCable gage interface is engineered to change the output on the Mettler Toledo M-S / MS-L New Classic Precision Balance to an output in a Digimatic format. The 9-pin male connector on the Advanced Systems & Designs FlashCable connects directly to the 9-Pin female connector on the Mettler Toledo New Classic Series Precision Balance.
Designed to work with GageMux universal gage interface or other similar devices that recognize the Mitutoyo Digimatic signal. This FlashCable gage interface does not obtain any power from the gage. When connected to the GageMux, pin 9 of the 10-pin input port provides the power to the FlashCable gage interface. If using devices, other than the GageMux, make sure pin 9 on the connector provides 5vDC power to the FlashCable. When the FlashCable gage interface is connected to the GageMux, the LED on the FlashCable turns GREEN which indicates that the FlashCable interface is connected properly. The LED turns RED when the data is being sent or a data request is triggered.
The data transfer can be triggered using any of the following methods:
- Using the print / transmit data button on the Mettler Toledo MS-S New Classic Precision Balance
- Using 300-1S in-line handswitch
- Using a Footswitch on the FlashCable (not included)
- Using the Footswitch on the GageMux USB (or equivalent triggering method on similar devices)
- Sending a gage read command from the computer to the gage
A detailed operation manual is included with this FlashCable gage interface. At the factory, Advanced Systems & Designs normally sets the FlashCable to the default settings on the Mettler Toledo Precision Balance. Make sure both the Mettler Toledo MS Series Precision Balance and FlashCable gage interface are set to the same values. Refer to the Mettler Toledo MS Series operating instructions for more information on external communication. Six foot standard cable length.
