Advanced Systems & Designs, 600-22-MagnaMike8500-MTI, FlashCable Digimatic Output Cable for Panametrics MagnaMike 8500
Features:
- Digimatic output FlashCable for Panametrics MagnaMike 8500 Thickness Gage
- Sends data to GageMux or devices that recognize the Digimatic Signal
- Several options to trigger data
The Advanced Systems and Designs FlashCable is engineered to change the output on the Panametrics MagnaMike 8500 Thickness Gage to an 10-pin output in a Mitutoyo Digimatic format. Using a high-quality 6-pin connector, this FlashCable is designed to work with GageMux or other SPC data acquisition systems that recognize the Mitutoyo Digimatic signal. The FlashCable does not obtain any power from the gage. When connected to the GageMux, pin 9 of the 10-pin input port provides the power to the FlashCable. If using devices, other than the GageMux, make sure pin 9 of the 10-pin connector provides a 5VDC supply to the FlashCable.Data transfer can be triggered using any of the following methods:
- Using the data send button on the gage, if it has one
- Using 300-1S in-line handswitch
- Using the Footswitch on the GageMux (or equivalent triggering method on similar devices)
- Sending a gage read command from the computer to the GageMux
A detailed operation manual is included with this FlashCable. The communication parameters can be changed and reconfigured per requirements for both the FlashCable and the Panametrics MagnaMike 8500 Thickness Gage. Advanced Systems & Designs normally sets the FlashCable to the default settings on the MagnaMike 8500 Thickness Gage. Make sure both the Panametrics MagnaMike 8500 Thickness Gage and FlashCable are set to the same values. Refer to the user manual for more information on external communication. Six foot standard cable length.