Advanced Systems & Designs, 600-22-EdmundsE9000-MTI, Digimatic FlashCable for Edmunds E9000 | 9300 Accusetter II Column Amplifier
Features:
- Digimatic output FlashCable gage interface cable for the Edmunds E9000/9300 Accusetter II Column Amplifier
- Sends data to GageMux or devices that recognize the Digimatic Signal
- Several options to trigger data
Send data to GageMux gage interface or other Digimatic input devices.This Advanced Systems and Designs (ASDQMS) FlashCable gage interface is designed to change the output on the Edmunds E9000 or 9300 Accusetter II Column Amplifier to Digimatic format. The 9-pin male connector on the Advanced Systems & Designs FlashCable connects to a female output connector on the Edmunds Accusetter II Column Amplifier.
This FlashCable gage interface is engineered to work with GageMux multi-input gage interface or similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable does not receive power from the Edmunds Accusetter II.
Pin 9 of the 10-pin input port on the GageMux gage interface provides the power to this FlashCable gage interface. When using similar devices make sure pin 9 of the 10-pin connector provides 5V DC power to the FlashCable gage interface. The LED on the FlashCable is lit a solid GREEN when properly connected to a Digimatic signal. The LED flashes RED when a data request is triggered or data is sent from the FlashCable gage interface.
The data transfer can be triggered using any of the following methods:
- Using the footswitch or ENTER button on the Edmunds E9000/9300 Accusetter II Column Amplifier
- Using the Footswitch on the GageMux USB or similar triggering method
- Using 300-1S in-line handswitch
- Using a Footswitch on the FlashCable (not included)
Sending a gage read command from the computer to the Edmunds E9000/9300 Accusetter II Column Amplifier
A detailed operation manual is included with this FlashCable gage interface. The factory setting on the Advanced Systems & Designs FlashCable gage interface are the default settings on the Edmunds E9000/9300 Accusetter II Column Amplifier. Both must be set to the same communication values. Refer to the Edmunds Accusetter II user manual for more information on setting up external communication.Six foot standard cable length.
