Subject to the use of all the optional accessories |
Product Type | PTZ |
Maximum Resolution | 4MP |
Application Environment | Indoor |
Image Sensor | Progressive Scan CMOS |
Sensor Size | 1/3 " |
Effective Pixels | 2688(H) X 1520(V) (4.09 MP) |
Day / Night | Yes |
Low Light Sensitivity | Superior |
Minimum Illumination | Color: 0.1 lux at F1.6 (30 IRE , 2400 K); B/W: 0.05 lux at F1.6 (30 IRE, 2400 K) |
Color to B/W Switch | ISP based switch, configurable |
Mechanical IR Cut Filter | Yes |
IR Sensitivity Range | 700-1100nm |
IR LED | No |
Electronic Shutter | 1/15-1/2000 second (manual mode, 60 Hz); 1/15-1/10000 second (auto mode, 60 Hz) |
Horizontal Resolution (TV Lines) | 1850 TVL |
S/N Ratio | 56 dB |
Focal Length | Zoom, f4.5-148.5mm |
Aperture | F1.6-F5.0 |
Zoom Ratio | 33x optical |
Zoom Speed | 3.1 second (wide to tele) |
Zoom Application | Camera Installation, Auto Zoom by Event, Manual Operation |
Iris | DC-Iris |
Focus | Autofocus |
Lens Mount | Board mount |
Horizontal Viewing Angle | 58.78° - 2.35° |
Vertical Viewing Angle | 35.39° - 1.32° |
Scan Panning / Tilting Speed | 0.16° - 32°/second, 0.16° - 32°/second |
Manual Panning / Tilting Speed | 1.6° - 40.32°/second, 0.16° - 20.16°/second |
Preset Panning / Tilting Speed | 0.16° - 480°/second, 0.16° - 480°/second |
Panning Range | 0°-360° (with auto-flip) |
Tilting Range | 0°-180° |
PTZ Control | Remote manual control, 10 preset tours, Auto scan |
Preset Accuracy (Panning/Tilting) | 0.265°/0.265° |
Absolute Position | Yes |
Pan, Tilt or Zoom protocol | Visca, Pelco-D, Pelco-P, ACTi URL command |
Compression | H.264 (Baseline/ Main/ High profile), MJPEG |
Maximum Frame Rate vs. Resolution | 15 fps at 2688 x 1520 15 fps at 2560 x 1440 30 fps at 1920 x 1080 30 fps at 1280 x 720 30 fps at 800 x 600 30 fps at 640 x 480 15 fps at 320 x 240 |
Multi-Streaming | Simultaneous dual streams based on two configurations |
Bit Rate | 28Kbps - 6Mbps (per stream) |
Bit Rate Mode | Constant, Variable |
Wide Dynamic Range | Advanced WDR (75 dB) |
Image Enhancement | White Balance, Brightness, Contrast, Sharpness, Automatic gain control, Flickerless, Digital Image Stabilizer (DIS, EIS), Defogging |
Digital Noise Reduction | 2D + 3D DNR |
Privacy Mask | 32 configurable regions |
Text Overlay | Yes |
On-Screen Graphics | Yes |
Server-based Analytics | Object Line Counting, People Counting, Face Detection, Object Based Motion Detection, Tamper, Object Line Crossing Detection, Object Enter Area Detection, Missing Object Detection, Unattended Object Detection, Smoke Detection, Heat Map, Dwell Time, People Queue Detection, (Require PC-based or standalone IVS or ALPR Server. Contact ACTi support for recommendations on how to maximize analytical accuracy) |
Image Orientation | Flip, Mirror |
Audio Type | 2-way, Line-in, Line-out |
Audio Compression | 8 kHz, 16 bit encoding, Mono, PCM, G.711 |
Network Protocol & Service | IPv4/v6, TCP, UDP, DHCP, PPPoE, HTTP, HTTPS, DNS, DDNS, NTP, RTP, RTSP, RTCP, SMTP, FTP, IGMP, ICMP, ARP, Bonjour, UPnP, QoS, SNMP, IEEE 802.1X |
Ethernet Port | 1 x RJ-45 connector |
Security | IP address filtering, HTTPS encryption, Password protected user level, Anonymous login, IEEE 802.1X network access control |
Event Trigger | Video motion detection (3 regions), External device through digital input, Sound detection, |
Event Response | Notify control center, Go to PTZ preset point or preset tour, Change camera settings, Command other devices, E-mail notification with snapshots, Play the audio file, Push notification to mobile device, Save video to local storage, Upload video or snapshot to FTP server, Upload video to NVR server, Activate external device through digital output |
Unified Solution | Fully compatible with ACTi software |
Software Development Kit | Yes |
GPS Position | Manual setting |
ONVIF Compliant | Yes, Profile S, Profile G, Profile Q |
GB28181 Compliant | Yes |
Web Browser | IE 11 |
Auto Firmware Upgrade | Yes |
Audio Interface | 3.5mm Phone Jack |
Local Storage | MicroSDHC, MicroSDXC memory card slot (card not included) |
Digital Input/Output | 2/2 |
Power Source | High PoE (IEEE802.3at), DC 12V |
Power Consumption | 12.6 W (PoE) |
Weight | 1573g (3.468lb) |
Dimensions | (D x H): 150mm x 163.3mm (5.9" x 6.4") |
Environmental Casing | Vandal resistant (IK09) |
Bundled Accessories | Surface mount, Power Adapter |
Mount Type | Surface, Gang Box, Pendant, Converter for NPT Standard Mounts, Flush, Wall Mount, Pole Mount, Corner Mount |
Starting Temperature | -10°C - 50°C (14°F - 122°F) within 30 minutes |
Operating Temperature | -20°C - 50°C (-4°F - 122°F) |
Operating Humidity | 10% - 85% RH |
Approvals | CE, FCC, IK09, UL Listed (UL 60950-1) |