Buy ACI 148297, Carbon Dioxide Sensor, Temp 10K Type II, Setpoint 0-1K

info@PrimeBuy.com

1-855-969-9322
1-908-282-3332 (Intl.)

ACI (Automation Components), A/CO2-R2SO-CP-A10-C5, 148297, Carbon Dioxide Sensor, Room, 0-2000 PPM, (0-5V, 0-10V, 4-20mA), Temp (10K Type II), Setpoint (0-1K), Cool/Warm Sticker, Override

The ACI Carbon Dioxide Room Series (A/CO2-R2) monitors the carbon dioxide (CO2) levels in commercial, school, and office-type environments. The concentration of CO2 is a strong indication of the overall indoor air quality. The A/CO2 Series is based on a single beam, nondispersive infrared technology and is a cost-efficient solution for measuring carbon dioxide levels for building climate control. In addition, ABC software eliminates the need for manual calibration. Carbon Dioxide concentration is measured up to 2,000 ppm and is converted into proportional analog outputs. The factory default outputs are 0-10 VDC (Output 1) and 4-20 mA (Output 2), whereas 0-5 VDC is field selectable via integral dip switches.

Applications:

Schools, Office Buildings, Auditoriums, Gymnasiums, Shopping Malls, Theatres, Demand Control Ventilation & Economizers

Report incorrect product information

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Notifications

Notifications Item is non-returnable unless defective.
Please review our Return Policy.

All sales are final

These are made-to-order items.
This product is not eligible for return or exchange unless defective.
The average lead-time is 1 or 2 weeks.

Return and Warranty

Item is non-returnable unless defective

Technical Details

Reviews

Supply Voltage

24 VAC +/-20%, 50/60 Hz (half-wave rectifier) / 16.5-40 VDC maximum

Power Consumption

3 VA for 24 VAC, 3W for 24 VDC (peak); <0.9W (average)

Sensing Technology

Single beam infrared sensing technology (NDIR)

Sensing Method

Diffusion

Measurement Range Default

0 to 2,000 ppm

Extended CO2 Ranges

Up to 10,000 ppm (factory set)

CO2 Accuracy

+/- 40 ppm and +/- 3% of reading ( at 15-35°C; 20-70% RH and 101.3 kPa)

Extended Range Accuracy

+/- 30 ppm and +/- 5% of reading

Fail Safe

Polarity protected

Pressure Dependence

+ 1.6% reading per kPa (deviation from standard pressure 101.3 kPa)

Response Time

≤ 2 minutes, diffusion

Warm-Up Time

< 1 Minute ( at full specs < 15 minutes)

Temperature Accuracy

+/- 1°F (+/- 0.6°C)

Operating Temperature Range

32 to 122°F (0 to 50°C)

Operating Humidity Range

0 to 95%, non-condensing

Connections / Wire Size

Screw Terminal Blocks / 16 (1.31 mm2) to 26 (0.129 mm2) AWG

Terminal Block Torque Rating

0.5 Nm (minimum); 0.6 Nm (maximum)

Enclosure

ABS, Plastic, White, UL94-HB

Sensor Coverage Area

7,500 sq. ft maximum

Mounting Height

4-6 ft

Sensor Life

> 15 years (typical)

Calibration

ABC algorithm (Automatic Baseline Correction)

Product Dimensions

(H) 4.50" (114.30 mm) x (W) 2.75" (69.85 mm) x (D) 1.12" (28.45 mm)

Product Weight

0.230 lbs (0.104 kg)

Agency Approvals

EMC Directive 2014/30/EC / RoHS Directive 2011/65/EU

CO2 Output Signal

Output 1: 0-5 VDC or 0-10 VDC (Default)
Output 2: 4-20 mA (500 Ohm load maximum)

Configuration

Room with Set Point and Override

Temperature Sensor

CP (Type II)

Slidepots Range in Ohms

0 to 1K

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

Supply Voltage

24 VAC +/-20%, 50/60 Hz (half-wave rectifier) / 16.5-40 VDC maximum

Power Consumption

3 VA for 24 VAC, 3W for 24 VDC (peak); <0.9W (average)

Sensing Technology

Single beam infrared sensing technology (NDIR)

Sensing Method

Diffusion

Measurement Range Default

0 to 2,000 ppm

Extended CO2 Ranges

Up to 10,000 ppm (factory set)

CO2 Accuracy

+/- 40 ppm and +/- 3% of reading ( at 15-35°C; 20-70% RH and 101.3 kPa)

Extended Range Accuracy

+/- 30 ppm and +/- 5% of reading

Fail Safe

Polarity protected

Pressure Dependence

+ 1.6% reading per kPa (deviation from standard pressure 101.3 kPa)

Response Time

≤ 2 minutes, diffusion

Warm-Up Time

< 1 Minute ( at full specs < 15 minutes)

Temperature Accuracy

+/- 1°F (+/- 0.6°C)

Operating Temperature Range

32 to 122°F (0 to 50°C)

Operating Humidity Range

0 to 95%, non-condensing

Connections / Wire Size

Screw Terminal Blocks / 16 (1.31 mm2) to 26 (0.129 mm2) AWG

Terminal Block Torque Rating

0.5 Nm (minimum); 0.6 Nm (maximum)

Enclosure

ABS, Plastic, White, UL94-HB

Sensor Coverage Area

7,500 sq. ft maximum

Mounting Height

4-6 ft

Sensor Life

> 15 years (typical)

Calibration

ABC algorithm (Automatic Baseline Correction)

Product Dimensions

(H) 4.50" (114.30 mm) x (W) 2.75" (69.85 mm) x (D) 1.12" (28.45 mm)

Product Weight

0.230 lbs (0.104 kg)

Agency Approvals

EMC Directive 2014/30/EC / RoHS Directive 2011/65/EU

CO2 Output Signal

Output 1: 0-5 VDC or 0-10 VDC (Default)
Output 2: 4-20 mA (500 Ohm load maximum)

Configuration

Room with Set Point and Override

Temperature Sensor

CP (Type II)

Slidepots Range in Ohms

0 to 1K

Return and Warranty

Item is non-returnable unless defective

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

ACI 148297 Carbon Dioxide Sensor, Temp 10K Type II, Setpoint 0-1K

Identifiers

Return and Warranty

Technical Details

Return and Warranty

Reviews