Entry Phone Specifications |
Power | Telephone line powered. Minimum 18V DC talk battery voltage with a minimum loop current of 20mA. Loop current may be boosted on low current lines with a Viking model TBB-1B Talk Battery Booster |
Dimensions |
Faceplate | 123.8mm x 125.4mm x 4.3mm (4.875” x 4.938” x 0.17”) |
Phone | 72mm x 46mm x 42mm (2.84” x 1.8” x 1.65”) |
Speaker Volume | Approximately 62db maximum at 1m |
Ring Voltage | 25V AC RMS minimum (for auto answer) |
CPC Disconnect Time | 300ms minimum |
REN | 0.8A |
Camera Specifications |
Power | 6-22V DC 150mA (12V DC UL Listed adapter included) |
Image Sensor | 1/4” color CMOS |
Video Output | 1 VP-P composite, NTSC, 75 ohms |
Resolution | 420 lines (640 x 480 at 30fps / 307,200 pixels) |
Sensitivity | 0.025 LUX (50 IRE) F 1.2 3200K |
Lens | 2.1mm, conical pinhole |
FOV(Field of View) | 80° Horizontal, 60° Vertical, 100° Diagonal |
Tilt/Swivel Adjustment | Vertical +/- 20°, horizontal +/- 30° |
IR Compatibility | This camera is equipped with an OLP (Optical Low Pass) filter to maintain correct video color in outside applications. The standard camera is NOT compatible with IR illuminators. If IR illumination is required, you will need to replace the exisiting camera with a Viking model VCAM-1IR |
Maximum Wire Run Length | 1000 ft with *RG59/RG6 for video and CAT5 for power (1 pair) and entry phone audio (1 pair). 150 ft with CAT5E for video, power and entry phone audio (longer video runs are possible by using video balun transceivers |
![Camera Horizontal Field of View](//primebuy.com/assets_images/depiction/viking/E-65-BK-EWP_d1.jpg?msrc=sitebanner_mainpage_fp_1625512) |
Entry Phone / Camera Specifications |
Operating Temperature | -34° C to 65° C (-30° F to 150° F) |
Humidity | 5% to 95% non-condensing |
Shipping Weight | 0.55 kg (1.2 lbs) |
Connections | (5) gel-filled butt connectors (3M Scotchlok UR2) |
Recommended Electrical Box for Flush Mounting | Double gang with minimum inside dimensions of 2.25” deep x 3.65” wide x 2.84” tall (Allied molded 9331 or equivalent) |
Recommended Surface Mount Box | Viking model VE5x5 (DOD 424) |
Proximity Card Reader |
Power | 5 to 14V DC at 60mA maximum |
Maximum Cable Length | 500 ft 24 Awg stranded shielded (Belden 9537) |
Frequency | 125KHz |
Format | 26 bit Wiegand |
Read Range | 1.25” to 2.0” |
Technologies Supported | Viking PRX-C, PRX-C-ISO, PRX-FOB, certain legacy HID® proximity protocols and certain AWID 125Khz proximity protocols |
Transducer | Beeps during card read |
LED | Red, turns off during card read |
Humidity | Up to 100% (fully potted EWP) |
Operating Temperature | -34°C to 65°C (-30°F to 150°F) |